BL702 Robot
tomrodinger·line_following_robot·PCB/V2/BL702 Robot.kicad_pcb
About the BL702 Robot PCB
BL702 Robot is an open source RISC-V PCB design by tomrodinger, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 104.9 × 60.4 mm, with 68 components from 47 distinct parts.
Its main chip is the C2874060, from the RISC-V family. Other key parts include the C94625. By type, the board carries 24 capacitors, 24 resistors, 6 diodes, 2 ICs, 2 modules and 2 transistors.
It belongs with the robotics & motion designs in this gallery.
From the project
The code for the line following robot that runs on BL702/BL706
Main components on the BL702 Robot
BL702 Robot bill of materials (BOM)
68 components, 47 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C2874060 BL702 | QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm | U1 |
| 1 | C94625 FM8002A | SOP-8_3.9x4.9mm_P1.27mm | U2 |
| 2 | CONN_01X02_MALE Conn_01x02_Male | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | M1, M2 |
| 2 | BCX56 | SOT-89-3 | Q1, Q2 |
| 1 | C255896 32MHz | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | CONN_01X04_MALE Conn_01x04_Male | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Antenna_Dipole | Texas_SWRA117D_2.4GHz_Right | AE1 |
| 1 | Battery | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | BT1 |
| 1 | Speaker | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | LS1 |
| 1 | SW_SPST | MSK12C02-HB | SW2 |
| 2 | C108793 LED_RGBA | FM-B2020RGBA-HG | D1, D2 |
| 2 | LED | LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm | D3, D4 |
| 1 | C38989 1N4148WS | D_SOD-323 | D5 |
| 1 | 1N4148WS | D_SOD-323 | D6 |
| 1 | C237342 0R | L_0402_1005Metric | L2 |
| 1 | 2.2uH | L_0805_2012Metric | L3 |
| 6 | C12530 2.2uF | C_0402_1005Metric | C3, C5, C7, C8, C16, C23 |
| 1 | C172823 NC | C_0402_1005Metric | C4 |
| 1 | C718625 NC | C_0402_1005Metric | C6 |
| 1 | C307331 2.2uF | C_0402_1005Metric | C9 |
Show 27 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C32949 2.2uF | C_0402_1005Metric | C10 |
| 1 | C12530 100nF | C_0402_1005Metric | C11 |
| 1 | C96446 10pF | C_0402_1005Metric | C12 |
| 1 | C307331 10uF | C_0603_1608Metric | C13 |
| 1 | C32949 12pF | C_0402_1005Metric | C14 |
| 1 | C1547 10pF | C_0402_1005Metric | C15 |
| 1 | C307331 12pF | C_0402_1005Metric | C17 |
| 1 | C437460 0.39uF | C_0603_1608Metric | C18 |
| 1 | C32949 10pF | C_0402_1005Metric | C19 |
| 1 | C1547 100nF | C_0402_1005Metric | C20 |
| 2 | C15849 1uF | C_0603_1608Metric | C21, C22 |
| 1 | C307331 100nF | C_0402_1005Metric | C24 |
| 2 | C96446 1uF | C_0603_1608Metric | C25, C26 |
| 1 | C11702 10K | R_0402_1005Metric | R3 |
| 6 | C11702 1K | R_0402_1005Metric | R4, R5, R6, R10, R11, R12 |
| 1 | C25744 510R | R_0402_1005Metric | R7 |
| 1 | C25744 20K | R_0402_1005Metric | R8 |
| 3 | C25744 10K | R_0402_1005Metric | R9, R19, R22 |
| 2 | C25765 20K | R_0402_1005Metric | R13, R14 |
| 2 | C25118 1K | R_0402_1005Metric | R15, R16 |
| 1 | C25744 1K | R_0402_1005Metric | R17 |
| 2 | GL5516 A9050 | R_LDR_5.0x4.1mm_P3mm_Vertical | R18, R21 |
| 1 | C17928 1K | R_0402_1005Metric | R20 |
| 1 | C17928 1R | R_1206_3216Metric | R23 |
| 1 | C17939 10K | R_0402_1005Metric | R24 |
| 1 | C25792 1R | R_1206_3216Metric | R25 |
| 1 | C2692901 10K | R_0402_1005Metric | R26 |
BL702 Robot design files
The KiCad project lives in the tomrodinger/line_following_robot repository on GitHub; these links point at the commit this page was built from.
BL702 Robot: common questions
What microcontroller does the BL702 Robot use?
The BL702 Robot is built around the C2874060, from the RISC-V family.
How big is the BL702 Robot PCB?
The BL702 Robot measures 104.9 × 60.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BL702 Robot?
68 components, from 47 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BL702 Robot design files?
From the tomrodinger/line_following_robot repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BL702 Robot design in my own project?
Yes, under the terms of its Apache-2.0 license, which tomrodinger chose for the repository.
Can I test firmware for the BL702 Robot without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
More boards in line_following_robot
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105