BL706 Robot
tomrodinger·line_following_robot·PCB/V12/BL706 Robot.kicad_pcb
About the BL706 Robot PCB
BL706 Robot is an open source RISC-V PCB design by tomrodinger, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 104.9 × 60.4 mm, with 102 components from 45 distinct parts.
Its main chip is the BL706C, from the RISC-V family. Other key parts include the FM8002A, TC8301 and RT9080-33GJ5. By type, the board carries 42 resistors, 37 capacitors, 8 diodes, 5 ICs, 2 modules and 2 transistors.
It belongs with the robotics & motion designs in this gallery.
From the project
The code for the line following robot that runs on BL702/BL706
Main components on the BL706 Robot
BL706 Robot bill of materials (BOM)
102 components, 45 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BL706C | QFN-48-1EP_6x6mm_P0.4mm_EP4.3x4.3mm | U1 |
| 1 | FM8002A | SOP-8_3.9x4.9mm_P1.27mm | U2 |
| 2 | TC8301 | SOP-8_3.9x4.9mm_P1.27mm | U3, U4 |
| 1 | RT9080-33GJ5 | TSOT-23-5 | U5 |
| 2 | Conn_01x02_Male | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | M1, M2 |
| 1 | PT19-21B/L41/TR8 | XDCR_PT19-21B_L41_TR8 | Q2 |
| 1 | S8050 | SOT-23-3 | Q3 |
| 1 | 32MHz | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | DNP | PinHeader_1x06_P1.27mm_Vertical | J2 |
| 1 | 2450AT43B100E | 2450AT43B100E | ANT1 |
| 1 | Battery | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | BT1 |
| 1 | Speaker | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | LS1 |
| 2 | LED_RGBA | FM-B2020RGBA-HG | D1, D2 |
| 2 | LED | LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm | D3, D4 |
| 1 | DNP | D_MELF | D5 |
| 2 | SMF5.0CA | D_SOD-123F | D6, D7 |
| 1 | IR19-21C/TR8 | IR19-21C-TR8 | D8 |
| 1 | 2.2uH | L_0805_2012Metric | L1 |
| 6 | 10uF | C_0603_1608Metric | C1, C12, C13, C25, C26, C28 |
| 8 | 2.2uF | C_0402_1005Metric | C2, C3, C5, C7, C8, C11, C16, C23 |
Show 25 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | DNP | C_0402_1005Metric | C4, C6 |
| 7 | 100nF | C_0402_1005Metric | C9, C24, C27, C29, C30, C31, C32 |
| 3 | 10pF | C_0402_1005Metric | C10, C14, C19 |
| 2 | 12pF | C_0402_1005Metric | C15, C20 |
| 1 | 22uF | C_0603_1608Metric | C17 |
| 1 | 0.39uF | C_0603_1608Metric | C18 |
| 2 | 1uF | C_0603_1608Metric | C21, C22 |
| 2 | 1uF | C_0402_1005Metric | C33, C34 |
| 1 | DNP | CP_Elec_8x10.5 | C35 |
| 1 | 1nF | C_0402_1005Metric | C36 |
| 1 | 10uF | C_1206_3216Metric | C37 |
| 1 | 100K | R_0402_1005Metric | R1 |
| 1 | 0R | R_0402_1005Metric | R2 |
| 4 | 150R | R_0402_1005Metric | R3, R20, R34, R35 |
| 9 | 1K | R_0402_1005Metric | R4, R5, R6, R10, R11, R12, R39, R40 +1 |
| 12 | 10K | R_0402_1005Metric | R7, R8, R9, R17, R19, R22, R28, R29 +4 |
| 2 | 20K | R_0402_1005Metric | R13, R14 |
| 2 | 47R | R_0402_1005Metric | R15, R16 |
| 2 | GL5516 | R_LDR_5.0x4.1mm_P3mm_Vertical | R18, R21 |
| 3 | 0R | R_1206_3216Metric | R23, R24, R32 |
| 1 | 47K | R_0402_1005Metric | R25 |
| 1 | DNP | R_0402_1005Metric | R26 |
| 1 | 680R | R_0805_2012Metric | R27 |
| 1 | 100R | R_0402_1005Metric | R30 |
| 2 | 1R | R_1206_3216Metric | R41, R42 |
BL706 Robot design files
The KiCad project lives in the tomrodinger/line_following_robot repository on GitHub; these links point at the commit this page was built from.
BL706 Robot: common questions
What microcontroller does the BL706 Robot use?
The BL706 Robot is built around the BL706C, from the RISC-V family.
How big is the BL706 Robot PCB?
The BL706 Robot measures 104.9 × 60.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BL706 Robot?
102 components, from 45 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BL706 Robot design files?
From the tomrodinger/line_following_robot repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BL706 Robot design in my own project?
Yes, under the terms of its Apache-2.0 license, which tomrodinger chose for the repository.
Can I test firmware for the BL706 Robot without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
More boards in line_following_robot
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105