ブレッドボード 1

torica-org·26th_PCB_AirData·Prototype_2(~12月)/ブレッドボード_1/ブレッドボード_1.kicad_pcb

ブレッドボード 1 PCB layout, top view — open source board by torica-org

About the ブレッドボード 1 PCB

ブレッドボード 1 is an open source PCB design by torica-org, published on GitHub. It is a 2-layer board measuring 52.2 × 23.5 mm, with 5 components from 5 distinct parts.

From the project

メイン兼エアデータセンサー部(今後、エアデータと言います)のリポジトリです。

- 同一レイヤー上で配線する(front面とback面を行き来しない) - できるだけ配線を曲げず,一直線に配線する - 電源線(5V,3.3Vなど)を近くに置かない - Type-Cに接続するときに配線幅を変える必要がある場合,ティアドロップ(フィレット的な機能,以下「ティアドロップの使用」参照)を使用して滑らかに幅を変化させる

例えば2層基板なら1層目と2層目の間の絶縁体を誘電体としたコンデンサにならないようにする. 1つ目の目的でビアを使うのは一般的ですが,2つ目のコンデンサになるのを防ぐ目的でビアを使用しているか確認してください.置く位置はfrontとbackのベタGNDが重なっているところで,角になっている部分や近くにビアがないところです.定期的に配置することでコンデンサ化を防ぐ効果が高まります.

ブレッドボード 1, from the project README
From the project README

ブレッドボード 1 bill of materials (BOM)

5 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SDP31-500
J1
1
AS5600_1
J2
1
SD_1
J3
1
AS5600_0
J4
1
CONN_01X12_SOCKET
Conn_01x12_Socket
J5

ブレッドボード 1 design files

The KiCad project lives in the torica-org/26th_PCB_AirData repository on GitHub; these links point at the commit this page was built from.

ブレッドボード 1: common questions

How big is the ブレッドボード 1 PCB?

The ブレッドボード 1 measures 52.2 × 23.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ブレッドボード 1?

5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ブレッドボード 1 design files?

From the torica-org/26th_PCB_AirData repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ブレッドボード 1 design in my own project?

The repository has no license, so all rights stay with torica-org. Use it as a reference, and ask the author before reusing the design.

More boards in 26th_PCB_AirData