ICS

torica-org·26th_PCB_AirData·Prototype_2(~12月)/各素子用/ICS/ICS.kicad_pcb

ICS PCB layout, top view — open source board by torica-org

About the ICS PCB

ICS is an open source PCB design by torica-org, published on GitHub. It is a 2-layer board measuring 10.3 × 10.7 mm, with 6 components from 5 distinct parts.

Other key parts include the 74AUC1G125. By type, the board carries 3 ICs, 2 connectors and 1 resistor.

From the project

メイン兼エアデータセンサー部(今後、エアデータと言います)のリポジトリです。

- 同一レイヤー上で配線する(front面とback面を行き来しない) - できるだけ配線を曲げず,一直線に配線する - 電源線(5V,3.3Vなど)を近くに置かない - Type-Cに接続するときに配線幅を変える必要がある場合,ティアドロップ(フィレット的な機能,以下「ティアドロップの使用」参照)を使用して滑らかに幅を変化させる

例えば2層基板なら1層目と2層目の間の絶縁体を誘電体としたコンデンサにならないようにする. 1つ目の目的でビアを使うのは一般的ですが,2つ目のコンデンサになるのを防ぐ目的でビアを使用しているか確認してください.置く位置はfrontとbackのベタGNDが重なっているところで,角になっている部分や近くにビアがないところです.定期的に配置することでコンデンサ化を防ぐ効果が高まります.

ICS, from the project README
From the project README

Main components on the ICS

74AUC1G125

ICS bill of materials (BOM)

6 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
~
U1
2
74AUC1G125
U2, U3
1
CONN_01X04_SOCKET
Conn_01x04_Socket
J1
1
CONN_01X03_SOCKET
Conn_01x03_Socket
J2
1
2.2K
2.2k
R1

ICS design files

The KiCad project lives in the torica-org/26th_PCB_AirData repository on GitHub; these links point at the commit this page was built from.

ICS: common questions

How big is the ICS PCB?

The ICS measures 10.3 × 10.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ICS?

6 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ICS design files?

From the torica-org/26th_PCB_AirData repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ICS design in my own project?

The repository has no license, so all rights stay with torica-org. Use it as a reference, and ask the author before reusing the design.

More boards in 26th_PCB_AirData