Stepping motor midi player
torishio·stepping-motor-midi-player·hardware/stp-motr-2ch-100x50.kicad_pcb
About the Stepping motor midi player PCB
Stepping motor midi player is an open source PCB design by torishio, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 50 mm, with 16 components from 14 distinct parts.
Other key parts include the Pro Micro 1L, Pro Micro 1R, Pro Micro 2L, Pro Micro 2R and A4988 1 CTRL. By type, the board carries 8 ICs, 4 connectors and 4 capacitors.
It belongs with the robotics & motion and audio designs in this gallery.
From the project
ステッピングモータでMIDIを再生できるやつ
USB MIDIで受け取った音を、ステッピングモーターに実際に鳴かせて音にするMIDIシンセサイザー。
STEPピンをMIDIノートの音程とぴったり同じ周波数でパカパカ切り替えると、ステッピングモーターがその音程で鳴いてくれる(singing stepperってやつ)。この現象を使って、A4988ドライバ+モーター1組を1音分の音源として、DAWやシーケンサーからMIDIで弾けるようにしたもの。各チャンネルにArduinoを1枚使うので、マスター機とかは無し。全部のArduinoが個別にUSB MIDI機器として認識される。
- firmware/ — Arduino(Pro Micro互換ボード)に書き込むスケッチ。 - stpmotrchannelvelocity/ → こっちが最終版。音程だけじゃなくベロシティ(強弱)もマイクロステップの粗さで表現できる。 - stpmotrchannel/ → ベロシティは見てない、シンプルな方。 - 全チャンネル、同じスケッチを書き込むだけでOK。 - hardware/ — 本番基板(2ch、100×50mm)関連を全部入れてある。 - stp-motr-2ch-100x50-gerbers.zip → 製造用データ一式。KiCadすら開かずに、これをJLCPCBとかにそのままアップロードすれば発注できる。 - gerbers/…
Main components on the Stepping motor midi player
Stepping motor midi player bill of materials (BOM)
16 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Pro Micro 1L | PinSocket_1x12_P2.54mm_Vertical | U1A |
| 1 | Pro Micro 1R | PinSocket_1x12_P2.54mm_Vertical | U1B |
| 1 | Pro Micro 2L | PinSocket_1x12_P2.54mm_Vertical | U2A |
| 1 | Pro Micro 2R | PinSocket_1x12_P2.54mm_Vertical | U2B |
| 1 | A4988 1 CTRL | PinSocket_1x08_P2.54mm_Vertical | U3A |
| 1 | A4988 1 PWR | PinSocket_1x08_P2.54mm_Vertical | U3B |
| 1 | A4988 2 CTRL | PinSocket_1x08_P2.54mm_Vertical | U4A |
| 1 | A4988 2 PWR | PinSocket_1x08_P2.54mm_Vertical | U4B |
| 1 | C144395 Motor 1 JST Sales America | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | C144395 Motor 2 JST Sales America | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | 455-2257 PWR STACK JST Sales America | JST_XH_B2B-XH-AR_1x02_P2.50mm_RightAngle | J3 |
| 1 | KF301-5.0-2P PWR TERMINAL Cixi Kefa Elec | KF301-2P_5.08mm | J4 |
| 2 | EEU-FC1E101SH 100uF 25V THT Panasonic | CP_Radial_D6.3mm_P2.50mm | C1, C3 |
| 2 | 100nF ceramic generic (very common part - any brand) | C_Disc_D4mm_P2.50mm | C2, C4 |
Stepping motor midi player design files
The KiCad project lives in the torishio/stepping-motor-midi-player repository on GitHub; these links point at the commit this page was built from.
Stepping motor midi player: common questions
How big is the Stepping motor midi player PCB?
The Stepping motor midi player measures 100 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stepping motor midi player?
16 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Stepping motor midi player design files?
From the torishio/stepping-motor-midi-player repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Stepping motor midi player design in my own project?
Yes, under the terms of its MIT license, which torishio chose for the repository.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kPowerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.0979Trollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979