Boardproof
TotallyNotAHackerTrustMeIAmADolphin·boardproof·evals/rung1/layout_run/01_import/rung1_usbc_attiny1616.kicad_pcb
About the Boardproof PCB
Boardproof is an open source AVR/Arduino PCB design by TotallyNotAHackerTrustMeIAmADolphin, published on GitHub under the MIT license. It is a 2-layer board measuring 40 × 30 mm, with 13 components from 12 distinct parts.
Its main chip is the ATTINY1616-MNR, from the AVR/Arduino family. Other key parts include the HT7533-1. By type, the board carries 3 capacitors, 3 resistors, 2 ICs, 2 connectors, 2 diodes and 1 fuse.
From the project
An MCP server for PCB design in which nothing counts as finished unless a machine-checked gate says so.
kicadmcpeval.xml holds 15 independent, read-only Q&A pairs. Each tests whether an agent with only this project's tools can answer a realistic question about the fixtures in tests/fixtures/. The format follows the mcp-builder evaluation guide. The suite tests tool usability, not board quality; the acceptance gate (docs/TESTING.md) handles that.
- Q1-Q10: single-tool lookups (DRC/ERC on simpleled, footprint counts, symbol values, the parametric footprint generator, datasheet extraction). - Q11-Q15:** multi-step chains: - Q11: collision check, then placement check. - Q12: DRC, then the…
Main components on the Boardproof
Boardproof bill of materials (BOM)
13 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATTINY1616-MNR ATtiny1616-M | VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm | U1 |
| 1 | HT7533-1 | SOT-89-3 | U2 |
| 1 | TYPE-C 6P (SHOU HAN) USB_C_PWR | USB_C_Receptacle_Shouhan_TYPE-C-6P | J1 |
| 1 | 2.54-1*3PIN (BOOMELE) UPDI | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | SMD0805P050TF 500mA PTC | Fuse_0805_2012Metric | F1 |
| 1 | SMBJ6.5CA | D_SMB | D1 |
| 1 | KT-0603R LED_RED | LED_0603_1608Metric | D2 |
| 1 | CL21A106KAYNNNE 10uF/25V | C_0805_2012Metric | C1 |
| 1 | CL10A105KB8NNNC 1uF/50V | C_0603_1608Metric | C2 |
| 1 | CC0603KRX7R9BB104 100nF/50V | C_0603_1608Metric | C3 |
| 2 | 0603WAF5101T5E 5.1k | R_0603_1608Metric | R1, R2 |
| 1 | 0603WAF1001T5E 1k | R_0603_1608Metric | R3 |
Boardproof design files
The KiCad project lives in the TotallyNotAHackerTrustMeIAmADolphin/boardproof repository on GitHub; these links point at the commit this page was built from.
Boardproof: common questions
What microcontroller does the Boardproof use?
The Boardproof is built around the ATTINY1616-MNR, from the AVR/Arduino family.
How big is the Boardproof PCB?
The Boardproof measures 40 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Boardproof?
13 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Boardproof design files?
From the TotallyNotAHackerTrustMeIAmADolphin/boardproof repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Boardproof design in my own project?
Yes, under the terms of its MIT license, which TotallyNotAHackerTrustMeIAmADolphin chose for the repository.
Can I test firmware for the Boardproof without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k