39 open source boards using the HT7533-1
Real designs built with the HT7533-1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Neotron-Pico
Neotron-Compute
243.8 × 171.5 mm220 parts4LNo license249ZC95 MKII
CrashOverride85
191.5 × 76 mm319 parts2LGPL-3.0115AVR/Arduino
SH-RPi hardware
hatlabs
65 × 56.5 mm153 parts4LCC-BY-4.056STM32
CANchovy
fred314159265
75 × 50 mm59 parts4LNo license7STM32
VideoFrame
ts-manuel
80 × 50 mm103 parts4LGPL-3.05Silicon Labs
MerlynESC
YeetTheAnson
30.5 × 31.9 mm146 parts6LNo license4AVR/Arduino
Atari-SIO2SD-Igi-Version
RichardRozehnal
80 × 60 mm44 parts2LGPL-3.04STM32
Mixed-Signal-Guitar-Effects-Pedal
danromero1
60 × 75 mm110 parts4LMIT2STM32
Adacus
AoToS
68.6 × 88.9 mm111 parts4LNo license1Raspberry Pi
ComposerMIDICV
CopycatMusic
20 × 110 mm86 parts2LAGPL-3.01ESP32
Compact-S1-placement
ddasdkimo
160 × 110 mm694 parts2LNo license0STM32
VNA Project
fdreshaj
200 × 200 mm220 parts6LNo license0STM32
Guitar pedal
herculanodavi
110 × 96 mm127 parts4LMIT0STM32
MixSig
a-s-adam
59.9 × 73.3 mm110 parts4LNo license0STM32
SPECTRA-MX-1-
landjas09
60 × 75 mm110 parts4LNo license0STM32
Mxed Signal
cristobalcuevas
60 × 75 mm110 parts4LNo license0Mvpsu
KarpelesLab
60 × 57 mm87 parts2LCERN-OHL-S-2.00ESP32
S3.1
puji4810
90 × 55 mm79 parts2LApache-2.00STM32
Fatigue-Measurement-Board
JJ80901
58 × 85 mm79 parts4LNo license0RISC-V
UsbServoController
ucandevices
66 × 38 mm59 parts2LMIT0STM32
Split flap
DrewFerg11
39.6 × 54 mm45 parts2LCC-BY-NC-4.00AVR/Arduino
AskSinPP
c-klinger
48.5 × 48.5 mm40 parts2LCC-BY-NC-4.00ESP32
Custom-ESP32-S3-WROOM-1U-Devboard
aaakum4
36 × 52.7 mm35 parts2LMIT0AVR/Arduino
Boardproof
TotallyNotAHackerTrustMeIAmADolphin
40 × 30 mm13 parts2LMIT0Pcb pipeline
kfihihc
25 × 18 mm9 parts2LMIT0AVR/Arduino
HB-UNI-644
alexreinert
79 × 78 mm64 parts2LCC-BY-NC-4.0104STM32
Mixed Signal Board
AhmedAbo-Eita
72.1 × 99 mm116 parts4LNo license3ESP32
Layout-S2-review
ddasdkimo
200 × 170 mm694 parts2LNo license0ESP32
Backup pre fix16
puji4810
90 × 55 mm78 parts2LApache-2.00AVR/Arduino
Malenki-HV
MarkR42
19 × 32 mm42 parts4LGPL-3.072ESP32
Routing-R0
ddasdkimo
200 × 170 mm694 parts2LNo license0ESP32
Backup ripped
puji4810
90 × 55 mm78 parts2LApache-2.00AVR/Arduino
Malenki nano i
MarkR42
19 × 32 mm42 parts4LGPL-3.072ESP32
S3.1-before repack
puji4810
90 × 55 mm78 parts2LApache-2.00AVR/Arduino
Malenki-1616
MarkR42
19 × 24.1 mm28 parts2LGPL-3.072AVR/Arduino
XDuinoRailSwitch
chatelao
59.1 × 50.6 mm31 parts2LAGPL-3.00
How designs wire the HT7533-1
Read from the KiCad layouts of 29 open source designs, one per repository: what each pin of the HT7533-1 connects to, and the resistors, capacitors and other passives placed on it.
- The VOUT pin has a decoupling capacitor on 25 of 29 designs, most often 10 µF (then 22 µF).
- The VIN pin has a decoupling capacitor on 23 of 29 designs, most often 10 µF (then 22 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 93% | — |
| VINpin 2 | Connected to: 5V 66% · a signal 31% |
|
| VOUTpin 3 | Connected to: 3.3V 83% · a signal 17% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Neotron-Pico by Neotron-Compute, ZC95 MKII by CrashOverride85, HB-UNI-644 by alexreinert and Malenki-1616 by MarkR42.
The HT7533-1 in open source designs
The gallery holds 39 open source boards using the HT7533-1 from 29 GitHub repositories; a typical one measures about 60 × 55 mm and carries around 79 components.
56% are two-layer designs, the rest use four layers or more, and 59% carry an open source license.
The most starred is Neotron-Pico by Neotron-Compute.
Parts used alongside the HT7533-1
Microcontrollers on boards using the HT7533-1
What boards using the HT7533-1 are built for
HT7533-1: common questions
Where can I find a HT7533-1 reference design?
Each of the 39 boards on this page is a real design using the HT7533-1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the HT7533-1 VOUT pin?
The VOUT pin has a decoupling capacitor on 25 of 29 designs, most often 10 µF (then 22 µF). Counted from the KiCad layouts of 29 open source designs using the HT7533-1.
What decoupling capacitors do designs use on the HT7533-1 VIN pin?
The VIN pin has a decoupling capacitor on 23 of 29 designs, most often 10 µF (then 22 µF). Counted from the KiCad layouts of 29 open source designs using the HT7533-1.
What parts are used alongside the HT7533-1?
The USBLC6-2SC6, ADC141S626CIMM/NOPB, DAC7563SDGSR, MCP6001T-E/OT and REF3033AIDBZT appear in the most repositories here.
Which microcontrollers do boards using the HT7533-1 use?
Most are built on STM32 (12), AVR/Arduino (11), ESP32 (9) and Silicon Labs (1).
How big is a typical board using the HT7533-1?
The median is 60 × 55 mm, and 56% are two-layer designs.
What is the most popular open source board using the HT7533-1?
By GitHub stars, Neotron-Pico by Neotron-Compute, with 249 stars.
Can I simulate one of these boards using the HT7533-1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.