Zolertia lora breakout
tperale·zolertia-lora-breakout·hardware/breakout.kicad_pcb
About the Zolertia lora breakout
Zolertia lora breakout is an open source PCB design by tperale, published on GitHub. It is a 2-layer board measuring 40.3 × 50 mm, with 10 components from 9 distinct parts.
Other key parts include the RFM95W-915S2. By type, the board carries 4 connectors, 2 capacitors, 2 resistors, 1 IC and 1 switch.
It belongs with the rf & radio and dev boards & breakouts designs in this gallery.
From the project
LoRa breakout board for the Zolertia RE-MOTE board using the RFM95 chip.
Amphenol Right Angle Edge Mount SMA Connector RFM95 LoRa Radio Module

Main components on the Zolertia lora breakout
Zolertia lora breakout bill of materials (BOM)
10 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RFM95W-915S2 | HOPERF_RFM9XW_SMD | U1 |
| 2 | Conn_01x18_Male | PinHeader_1x18_P2.54mm_Vertical | J1, J3 |
| 1 | Conn_Coaxial | SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | J2 |
| 1 | Conn_Coaxial | U.FL_Molex_MCRF_73412-0110_Vertical | J4 |
| 1 | SW_Push | SW_DIP_SPSTx01_Slide_6.7x4.1mm_W8.61mm_P2.54mm_LowProfile | SW1 |
| 1 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 220R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 10KR | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
Zolertia lora breakout design files
The KiCad project lives in the tperale/zolertia-lora-breakout repository on GitHub; these links point at the commit this page was built from.
Zolertia lora breakout: common questions
How big is the Zolertia lora breakout?
The Zolertia lora breakout measures 40.3 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Zolertia lora breakout?
10 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Zolertia lora breakout design files?
From the tperale/zolertia-lora-breakout repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Zolertia lora breakout design in my own project?
The repository has no license, so all rights stay with tperale. Use it as a reference, and ask the author before reusing the design.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979