MotorDriver DRV8833
triakshasingh·MotorDriver_DRV8833

About the MotorDriver DRV8833 PCB
MotorDriver DRV8833 is an open source PCB design by triakshasingh, published on GitHub. It is a board, with 8 components from 7 distinct parts.
Other key parts include the DRV8833PWP. By type, the board carries 3 capacitors, 2 connectors, 1 IC, 1 diode and 1 resistor.
It belongs with the robotics & motion designs in this gallery.
From the project
DRV8833 dual H-bridge motor driver PCB designed in KiCad 10. Controls two DC motors via PWM input.
This project is a custom PCB design centered around the Texas Instruments DRV8833 — a dual H-bridge motor driver capable of controlling two brushed DC motors (or one stepper motor) independently. The board is designed to be small, clean, and easy to integrate into a larger system via standard 0.1" pin headers.
The design prioritizes simplicity and reliability: power decoupling is handled close to the IC, a status LED gives visual feedback on power state, and both the SLEEP and FAULT pins are broken out to the control connector so the host MCU has full control.
Main components on the MotorDriver DRV8833
MotorDriver DRV8833 bill of materials (BOM)
8 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DRV8833PWP | HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm_ThermalVias | U1 |
| 2 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J1, J2 |
| 1 | LED | LED_0805_2012Metric | D1 |
| 1 | 0.1uF | C_0805_2012Metric | C1 |
| 1 | 2.2uF | C_0805_2012Metric | C2 |
| 1 | 10uF | CP_EIA-6032-20_AVX-F | C3 |
| 1 | 4.7k | R_0805_2012Metric | R1 |
MotorDriver DRV8833 design files
The KiCad project lives in the triakshasingh/MotorDriver_DRV8833 repository on GitHub; these links point at the commit this page was built from.
- SchematicMotorDriver_DRV8833.kicad_sch
MotorDriver DRV8833: common questions
How many components are on the MotorDriver DRV8833?
8 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the MotorDriver DRV8833 design files?
From the triakshasingh/MotorDriver_DRV8833 repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the MotorDriver DRV8833 design in my own project?
The repository has no license, so all rights stay with triakshasingh. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979