TPS54331 Buck Converter

triakshasingh·TPS54331_Buck_Converter·TPS54331_BuckConverter/TPS54331_BuckConverter.kicad_sch

TPS54331 Buck Converter

About the TPS54331 Buck Converter PCB

TPS54331 Buck Converter is an open source PCB design by triakshasingh, published on GitHub. It is a board, with 28 components from 17 distinct parts.

Other key parts include the TPS54331D. By type, the board carries 9 capacitors, 6 test points, 6 resistors, 4 connectors, 1 IC and 1 diode.

It belongs with the power & battery and test & measurement designs in this gallery.

From the project

12V to 5V 3A step-down buck converter built on the TI TPS54331. Simulated in LTspice, laid out in KiCad.

A compact 12V to 5V, 3A step-down switching regulator, taken from datasheet spec through circuit simulation to a manufacturable PCB. Designed to power the main logic and motor-control rails of a self-balancing robot from a single input supply.

Simulated and verified in LTspice, then captured and laid out in KiCad.

Loop-break point in the feedback path. R4 is a 0 Ohm link at the top of the feedback divider, with test point TP4 on the divider side of it. Lifting R4 breaks the feedback loop at a single point, so a signal can be injected at TP4 for a loop gain (Bode) measurement without…

Main components on the TPS54331 Buck Converter

TPS54331 Buck Converter bill of materials (BOM)

28 components, 17 distinct parts.

QtyPartRefs
1
TPS54331D
U1
4
Conn_01x02_Pin
J1, J2, J3, J4
6
TestPoint
TP1, TP2, TP3, TP4, TP5, TP6
1
MB340A
D1
1
6.8uH
L1
2
4.7uF
C1, C2
2
0.01uF
C3, C5
1
0.1uF
C4
1
1000pF
C6
1
47pF
C7
2
47uF
C8, C9
1
332k
R1
1
68.1k
R2
1
29.4k
R3
1
0
R4
1
10.2k
R5
1
1.96k
R6

TPS54331 Buck Converter design files

The KiCad project lives in the triakshasingh/TPS54331_Buck_Converter repository on GitHub; these links point at the commit this page was built from.

TPS54331 Buck Converter: common questions

How many components are on the TPS54331 Buck Converter?

28 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the TPS54331 Buck Converter design files?

From the triakshasingh/TPS54331_Buck_Converter repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the TPS54331 Buck Converter design in my own project?

The repository has no license, so all rights stay with triakshasingh. Use it as a reference, and ask the author before reusing the design.

Similar boards