11 open source boards using the TPS54331D

Real designs built with the TPS54331D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the TPS54331D

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the TPS54331D connects to, and the resistors, capacitors and other passives placed on it.

  • The BOOT pin has a series capacitor on 9 of 9 designs, most often 100 nF (then 10 nF).
  • The SS pin has a capacitor to GND on 9 of 9 designs, most often 8.2 nF (then 10 nF).
  • The PH pin has a inductor on 9 of 9 designs, most often 6.8 µH (then 22 µH).
  • The PH pin has a series capacitor on 9 of 9 designs, most often 100 nF (then 10 nF).
BOOTpin 1Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (7), 10 nF (2)
VINpin 2Connected to: 24V 67% · a signal 33%
  • Decoupling capacitor on 56% · 100 µF (3), 10 µF (3), 10 nF (2)
ENpin 3Connected to: Not connected 78% · a signal 22%
SSpin 4Connected to: Signal 100%
  • Capacitor to GND on 100% · 8.2 nF (4), 10 nF (3), 100 nF (1)
VSENSEpin 5Connected to: Signal 100%
  • Resistor to GND on 89% · 1.96 kΩ (3), 3.24 kΩ (2), 10 kΩ (2)
  • Pull-up to 5V on 67% · 10.2 kΩ (4), 10 kΩ (1), 200 kΩ (1)
  • Series resistor on 33% · 1.5 kΩ (1), 10 kΩ (1), 10.2 kΩ (1)
COMPpin 6Connected to: Signal 100%
  • Capacitor to GND on 89% · 10 pF (3), 33 pF (2), 1 nF (1)
  • Series resistor on 56% · 5.62 kΩ (1), 64.9 kΩ (1), 22 kΩ (1)
  • Series capacitor on 44% · 4.7 nF (2), 47 pF (1), 1 nF (1)
GNDpin 7Connected to: GND 100%
PHpin 8Connected to: Signal 100%
  • Inductor on 100% · 6.8 µH (4), 22 µH (1), 8.2 µH (1)
  • Series capacitor on 100% · 100 nF (7), 10 nF (2)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PiPLC-Mainboard by Chrismettal, ESP-Hiro by Chrismettal, Riskybirdv3 by ucb-bar and PowerDistribution by danielvilas.

The TPS54331D in open source designs

The gallery holds 11 open source boards using the TPS54331D from 10 GitHub repositories; a typical one measures about 97.2 × 62.2 mm and carries around 74 components.

70% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.

The most starred is PiPLC-Mainboard by Chrismettal.

Parts used alongside the TPS54331D

Microcontrollers on boards using the TPS54331D

TPS54331D: common questions

Where can I find a TPS54331D reference design?

Each of the 11 boards on this page is a real design using the TPS54331D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS54331D BOOT pin connected?

The BOOT pin has a series capacitor on 9 of 9 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 9 open source designs using the TPS54331D.

How is the TPS54331D SS pin connected?

The SS pin has a capacitor to GND on 9 of 9 designs, most often 8.2 nF (then 10 nF). Counted from the KiCad layouts of 9 open source designs using the TPS54331D.

How is the TPS54331D PH pin connected?

The PH pin has a inductor on 9 of 9 designs, most often 6.8 µH (then 22 µH). Counted from the KiCad layouts of 9 open source designs using the TPS54331D.

Which microcontrollers do boards using the TPS54331D use?

Most are built on ESP32 (3), STM32 (2) and ESP8266 (1).

How big is a typical board using the TPS54331D?

The median is 97.2 × 62.2 mm, and 70% are two-layer designs.

What is the most popular open source board using the TPS54331D?

By GitHub stars, PiPLC-Mainboard by Chrismettal, with 19 stars.

Can I simulate one of these boards using the TPS54331D before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part