Ultramegausb atari st rpikbd
About the Ultramegausb atari st rpikbd PCB
Ultramegausb atari st rpikbd is an open source RP2040/RP2350 PCB design by trickydee, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 98.2 × 68.8 mm, with 9 components from 8 distinct parts.
Its main chip is the Pico, from the RP2040/RP2350 family. By type, the board carries 3 connectors, 1 IC and 1 diode.
It belongs with the iot & wireless and keyboards designs in this gallery.
From the project
USB & Bluetooth to IKBD Interface for Atari ST / STE / Mega and TT
This is useful if you have an Atari Mega ST that is missing its keyboard or if you just want to use modern keyboards, mice and joysticks with your ST.
The emulator provides the ability to use USB or Bluetooth keyboards, mice and joysticks / gamepads with the ST. You can also use original 9 pin Dsub 'Atari' Joysticks!.
Currently bluetooth requires a Pico 2w device - with this it is possible to Mix and Match any combination of USB, Bluetooth or 9 Pin Atari Joystick peripherals to create your perfect atari setup. If you just want USB support any Pico device will suffice.
Main components on the Ultramegausb atari st rpikbd
Ultramegausb atari st rpikbd bill of materials (BOM)
9 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Pico | RPi_Pico_SMD_TH | U1 |
| 1 | RJ12 | RJ12_Amphenol_54601-x06_Horizontal | J1 |
| 2 | Conn_01x06_MountingPin | PinSocket_1x06_P2.54mm_Vertical | J2, J3 |
| 1 | SW_Right | SW_PUSH_6mm | ->1 |
| 1 | SW_Left | SW_PUSH_6mm | <-1 |
| 1 | Conn_01x04_MountingPin | PinSocket_1x04_P2.54mm_Vertical | Display1 |
| 1 | SW_Enter | SW_PUSH_6mm | Enter1 |
| 1 | LED | LED_D3.0mm | D1 |
Ultramegausb atari st rpikbd design files
The KiCad project lives in the trickydee/ultramegausb-atari-st-rpikbd repository on GitHub; these links point at the commit this page was built from.
Ultramegausb atari st rpikbd: common questions
What microcontroller does the Ultramegausb atari st rpikbd use?
The Ultramegausb atari st rpikbd is built around the Pico, from the RP2040/RP2350 family.
How big is the Ultramegausb atari st rpikbd PCB?
The Ultramegausb atari st rpikbd measures 98.2 × 68.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ultramegausb atari st rpikbd?
9 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ultramegausb atari st rpikbd design files?
From the trickydee/ultramegausb-atari-st-rpikbd repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ultramegausb atari st rpikbd design in my own project?
Yes, under the terms of its GPL-3.0 license, which trickydee chose for the repository.
Can I test firmware for the Ultramegausb atari st rpikbd without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350Open Book Abridged Edition
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1k
RP2040/RP2350Corne
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7k
RP2040/RP2350Corne
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7k
RP2040/RP2350LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0k
RP2040/RP2350Jitx design
55.5 × 65 mm26 parts4LGPL-3.05.0k
RP2040/RP2350Pro V2
kata0510
290.1 × 130 mm270 parts2LMIT2.3k