Cam shield
tridung141196·cam-shield·hardware/shield_camera.kicad_pcb
About the Cam shield
Cam shield is an open source PCB design by tridung141196, published on GitHub. It is a 2-layer board measuring 68.5 × 53.3 mm, with 9 components from 8 distinct parts.
Other key parts include the PC817. By type, the board carries 4 resistors, 1 IC, 1 connector, 1 switch, 1 diode and 1 capacitor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
esp32-cam-demo có thể: - Power input 5.5V to 28VDC (1.2A/5V output) and 5V USB - detected motions ( 0-8m), take a picture and send to server. - stream video jpeg - QR code Scan
esp32-cam-demo có thể: - Power input 5.5V to 28VDC (1.2A/5V output) and 5V USB - detected motions ( 0-8m), take a picture and send to server. - stream video jpeg - QR code Scan
- khi radar phát hiện bất cứ chuyển động nào sẽ gửi tín hiệu đến esp32 ( được cách li quang thông qua opto) khi đó. esp32 sẽ ghi lại ảnh và gửi lên serve.
This project was in development phase - we will remove this remark after release

Main components on the Cam shield
Cam shield bill of materials (BOM)
9 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PC817 | CP817 | U2 |
| 1 | RADAR | TerminalBlock_Pheonix_PT-3.5mm_2pol | J1 |
| 1 | ESP-UNO | ESP-UNO-SH | S1 |
| 1 | LED | D_0603 | D1 |
| 1 | 10uF | CP_Elec_4x5.3 | C1 |
| 1 | 220K | R_0603 | R1 |
| 2 | 10K | R_0603 | R2, R3 |
| 1 | 4.7K | R_0603 | R4 |
Cam shield design files
The KiCad project lives in the tridung141196/cam-shield repository on GitHub; these links point at the commit this page was built from.
Cam shield: common questions
How big is the Cam shield?
The Cam shield measures 68.5 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cam shield?
9 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cam shield design files?
From the tridung141196/cam-shield repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Cam shield design in my own project?
The repository has no license, so all rights stay with tridung141196. Use it as a reference, and ask the author before reusing the design.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979