Guitar-PowerSupply v3
tristancollins·Guitar-PowerSupply_v3
About the Guitar-PowerSupply v3 PCB
Guitar-PowerSupply v3 is an open source PCB design by tristancollins, published on GitHub. It is a 2-layer board measuring 85 × 80 mm, with 32 components from 10 distinct parts.
By type, the board carries 9 resistors, 6 diodes, 5 capacitors, 4 connectors, 4 test points and 2 jumpers.
It belongs with the audio designs in this gallery.
Guitar-PowerSupply v3 bill of materials (BOM)
32 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 1729131 Screw_Terminal_1x03 | PhoenixContact_MCV-G_03x5.08mm_Vertical | J1, J2, J3, J5 |
| 2 | Jumper_2_Bridged | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2 |
| 2 | 3386P-1-103TLF POT_TRIM Bournes | Potentiometer_Trimmer_Bourns_3339S_Vertical | RV1, RV2 |
| 4 | TP | Test_Point_Keystone_5005-5009_Compact | TP1, TP2, TP3, TP4 |
| 6 | D | Diode_DO-41_SOD81_Horizontal_RM10 | D1, D2, D3, D4, D5, D6 |
| 3 | UPW2C100MPD CP Nichicon | CP_Radial_D10.0mm_P2.50mm_P5.00mm | C1, C4, C5 |
| 2 | CP | CP_Radial_D18.0mm_P7.50mm | C2, C3 |
| 1 | R | R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_Horizontal | R1 |
| 7 | R | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2, R3, R5, R6, R7, R8, R9 |
| 1 | R | R_Axial_Power_L48.0mm_W12.5mm_P55.88mm | R4 |
Guitar-PowerSupply v3 design files
The KiCad project lives in the tristancollins/Guitar-PowerSupply_v3 repository on GitHub; these links point at the commit this page was built from.
- LayoutPowerSupply.kicad_pcb
- SchematicPowerSupply.kicad_sch
- BOMBoM.csv
Guitar-PowerSupply v3: common questions
How big is the Guitar-PowerSupply v3 PCB?
The Guitar-PowerSupply v3 measures 85 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Guitar-PowerSupply v3?
32 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Guitar-PowerSupply v3 design files?
From the tristancollins/Guitar-PowerSupply_v3 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Guitar-PowerSupply v3 design in my own project?
The repository has no license, so all rights stay with tristancollins. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687