HPVE-Fallen

triunex·HPVE-Fallen·hardware/kicad/HPVE_Controller.kicad_pcb

HPVE-Fallen PCB layout, top view — open source RP2040/RP2350 board by triunex

About the HPVE-Fallen PCB

HPVE-Fallen is an open source RP2040/RP2350 PCB design by triunex, published on GitHub. It is a 2-layer board measuring 124 × 94 mm, with 105 components from 4 distinct parts.

Its main chip is the RP2040_Pico, from the RP2040/RP2350 family. Other key parts include the 74HC595 and TC4427ACOA.

It belongs with the power & battery designs in this gallery.

From the project

A desktop phased-array acoustic emitter that creates tactile forcefields and floating 3D volumetric pixels in empty air, no screens, no goggles, and no smoke.

building mid-air touch and acoustic levitation for hack club fallen / maker faire shenzhen 2026.

screens are flat and boring, and wearing clunky vr goggles feels terrible. ever since i saw tony stark working over his holographic table in iron man, i wanted to build an interface where you can reach out with your bare hands and physically touch things floating in mid air. no gloves, no controllers, no smoke screens.

Main components on the HPVE-Fallen

HPVE-Fallen bill of materials (BOM)

105 components, 4 distinct parts.

QtyPartRefs
8
74HC595
U1, U2, U3, U4, U5, U6, U7, U8
1
RP2040_Pico
U10
32
TC4427ACOA
U101, U102, U103, U104, U105, U106, U107, U108 +24
64
400ST160
TX1, TX2, TX3, TX4, TX5, TX6, TX7, TX8 +56

HPVE-Fallen design files

The KiCad project lives in the triunex/HPVE-Fallen repository on GitHub; these links point at the commit this page was built from.

HPVE-Fallen: common questions

What microcontroller does the HPVE-Fallen use?

The HPVE-Fallen is built around the RP2040_Pico, from the RP2040/RP2350 family.

How big is the HPVE-Fallen PCB?

The HPVE-Fallen measures 124 × 94 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HPVE-Fallen?

105 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the HPVE-Fallen design files?

From the triunex/HPVE-Fallen repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the HPVE-Fallen design in my own project?

The repository has no license, so all rights stay with triunex. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the HPVE-Fallen without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards