TCAR IR Board
tronixio·robot-tcar·Kicad/ir/ir.kicad_pcb
About the TCAR IR Board
TCAR IR Board is an open source PCB design by tronixio, published on GitHub. It is a 2-layer board measuring 150 × 35 mm, with 26 components from 12 distinct parts.
Other key parts include the LITEON-LTH-1550-01 and MICROCHIP-MCP6541-DIP-08. By type, the board carries 9 resistors, 4 relays, 3 ICs, 2 transistors, 2 capacitors and 1 jumper.
It belongs with the robotics & motion designs in this gallery.
From the project
- 4 Wheels. - 4 DC Motors. - Power 2xCells 18650 Lithium Ion Rechargeable Batteries, with embedded charger. - 4WD Motor Smart Car Chassis.
- 4 Wheels. - 4 DC Motors. - Power 2xCells 18650 Lithium Ion Rechargeable Batteries, with embedded charger. - 4WD Motor Smart Car Chassis.
- TODO - MCU Board PIC-16BIT. - DRAFT - Motors Board LP298.
- TODO : Work in progress, prototype was not good, hardware, PCB and code can be rework. - DRAFT : Prototype OK, last check schematic, PCB & code can be modify.
THIS CODE IS PROVIDED WITHOUT ANY WARRANTY OR GUARANTEES. USERS MAY USE THIS CODE FOR DEVELOPMENT AND EXAMPLE PURPOSES ONLY. AUTHORS ARE NOT RESPONSIBLE FOR ANY ERRORS, OMISSIONS, OR DAMAGES THAT COULD RESULT FROM USING THIS FIRMWARE IN…

Main components on the TCAR IR Board
TCAR IR Board bill of materials (BOM)
26 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LITEON-LTH-1550-01 | zzzLTH-1550-01-HORIZONTAL | IC1 |
| 1 | LITEON-LTH-1550-01 | zzzLTH-1550-01-VERTICAL | IC2 |
| 1 | MICROCHIP-MCP6541-DIP-08 | DIP-08-W762 | U1 |
| 2 | ONSEMI-BC546-TO92 | TO-92-INLINE | Q1, Q2 |
| 4 | MOUNTING-HOLE-MASK-3MM | M3-MASK | H1, H2, H3, H4 |
| 1 | HARWIN-254-M-1X02-JUMPER-VERTICAL | HARWIN-M20-999024x | JP1 |
| 1 | HARWIN-254-M-1X04-VERTICAL | HARWIN-M20-999044x | K1 |
| 1 | HARWIN-254-M-1X05-VERTICAL | HARWIN-M20-999054x | K2 |
| 2 | HARWIN-254-M-1X02-VERTICAL | HARWIN-M20-999024x | K3, K4 |
| 1 | LED-1206-RED | LED-05MM-TH | LED1 |
| 2 | C-1206 | KEMET-C322 | C1, C2 |
| 9 | R-1206 | RESISTOR-1016-TH | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
TCAR IR Board design files
The KiCad project lives in the tronixio/robot-tcar repository on GitHub; these links point at the commit this page was built from.
- LayoutKicad/ir/ir.kicad_pcb
- SchematicKicad/ir/ir.kicad_sch
TCAR IR Board: common questions
How big is the TCAR IR Board?
The TCAR IR Board measures 150 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TCAR IR Board?
26 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the TCAR IR Board design files?
From the tronixio/robot-tcar repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the TCAR IR Board design in my own project?
The repository has no license, so all rights stay with tronixio. Use it as a reference, and ask the author before reusing the design.
More boards in robot-tcar
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979