TCAR Motor Board - L298P
tronixio·robot-tcar·Kicad/motors/main.kicad_pcb
About the TCAR Motor Board - L298P
TCAR Motor Board - L298P is an open source PCB design by tronixio, published on GitHub. It is a 2-layer board measuring 80 × 140 mm, with 135 components from 42 distinct parts.
Other key parts include the BQ2057W, L298P, 74LVC1G19, LM3480-50 and 74LVC2G17. By type, the board carries 28 resistors, 20 capacitors, 17 diodes, 12 LEDs, 11 ICs and 8 test points.
It belongs with the robotics & motion designs in this gallery.
From the project
- 4 Wheels. - 4 DC Motors. - Power 2xCells 18650 Lithium Ion Rechargeable Batteries, with embedded charger. - 4WD Motor Smart Car Chassis.
- 4 Wheels. - 4 DC Motors. - Power 2xCells 18650 Lithium Ion Rechargeable Batteries, with embedded charger. - 4WD Motor Smart Car Chassis.
- TODO - MCU Board PIC-16BIT. - DRAFT - Motors Board LP298.
- TODO : Work in progress, prototype was not good, hardware, PCB and code can be rework. - DRAFT : Prototype OK, last check schematic, PCB & code can be modify.
THIS CODE IS PROVIDED WITHOUT ANY WARRANTY OR GUARANTEES. USERS MAY USE THIS CODE FOR DEVELOPMENT AND EXAMPLE PURPOSES ONLY. AUTHORS ARE NOT RESPONSIBLE FOR ANY ERRORS, OMISSIONS, OR DAMAGES THAT COULD RESULT FROM USING THIS FIRMWARE IN…

Main components on the TCAR Motor Board - L298P
TCAR Motor Board - L298P bill of materials (BOM)
135 components, 42 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ2057W | SOIC-08 | U100 |
| 2 | L298P | SOPOWER-20 | U201, U204 |
| 4 | 74LVC1G19 | SOT-23-6 | U202, U203, U205, U206 |
| 1 | LM3480-50 | SOT-23-3 | U207 |
| 2 | 74LVC2G17 | SOT-23-6 | U301, U302 |
| 1 | LM3480-33 | SOT-23-3 | U303 |
| 2 | DMP2305U | SOT-23-3 | Q100, Q101 |
| 1 | STN790A | SOT-223-3-TABPIN2 | Q102 |
| 2 | BC846BS | SC-70-6 | Q301, Q302 |
| 1 | 18650 | KEYSTONE-1049 | BT100 |
| 16 | MOUNTING-HOLE-3MM-MASK | MOUNTING-HOLE-3MM-MASK | H101, H102, H103, H104, H105, H106, H107, H108 +8 |
| 4 | MOUNTING-HOLE-3.5MM | MOUNTING-HOLE-3.5MM | H117, H118, H119, H120 |
| 4 | OPB610 | OPB-610 | IR301, IR302, IR303, IR304 |
| 1 | PJ-102H | SAMESKY-PJ-002AH-SMT-TR | K100 |
| 1 | MOTOR 1 | SAMESKY-TB006-508-02BE | K201 |
| 1 | MOTOR 2 | SAMESKY-TB006-508-02BE | K202 |
| 1 | MOTOR 3 | SAMESKY-TB006-508-02BE | K203 |
| 1 | MOTOR 4 | SAMESKY-TB006-508-02BE | K204 |
| 1 | FRONT | HARWIN-M20-782104x | K301 |
| 1 | REAR | HARWIN-M20-782104x | K302 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | On/Off | E-SWITCH-200USPXT1A1M6RE | S100 |
| 1 | 10k | THERMISTOR-SMD | TH100 |
| 8 | HARWIN-S1751 | HARWIN-S1751 | TP100, TP101, TP102, TP103, TP104, TP105, TP201, TP301 |
| 1 | Charging | LED-SMD-1206 | LED100 |
| 1 | Power | LED-SMD-1206 | LED101 |
| 9 | RED | LED-SMD-1206 | LED201, LED202, LED203, LED204, LED205, LED206, LED207, LED208 +1 |
| 1 | +3V3 | LED-SMD-1206 | LED301 |
| 17 | PMEG3030 | SOD-128 | D100, D201, D202, D203, D204, D205, D206, D207 +9 |
| 9 | 100n | CAPACITOR-SMD-1206 | C100, C201, C202, C205, C206, C209, C210, C301 +1 |
| 7 | 1µ | CAPACITOR-SMD-1206 | C101, C211, C212, C302, C304, C305, C306 |
| 4 | 470µ | CAPACITOR-ELECTROLYTIC-RADIAL-100-160-050-WURTH | C203, C204, C207, C208 |
| 2 | 0Ω1 | RESISTOR-SMD-1210 | R100, R101 |
| 1 | 1k | RESISTOR-SMD-1206 | R102 |
| 12 | 10k | RESISTOR-SMD-1206 | R103, R105, R201, R202, R203, R206, R207, R208 +4 |
| 1 | 1M | RESISTOR-SMD-1206 | R104 |
| 1 | 36k | RESISTOR-SMD-1206 | R106 |
| 1 | 15k | RESISTOR-SMD-1206 | R107 |
| 4 | 0Ω5 | RESISTOR-SMD-1210 | R204, R205, R209, R210 |
| 1 | 12k | RESISTOR-SMD-1206 | R211 |
| 2 | 2k2 | RESISTOR-SMD-1206 | R305, R306 |
| 2 | 33Ω | RESISTOR-SMD-1206 | R307, R308 |
| 1 | 6k8 | RESISTOR-SMD-1206 | R309 |
TCAR Motor Board - L298P design files
The KiCad project lives in the tronixio/robot-tcar repository on GitHub; these links point at the commit this page was built from.
- LayoutKicad/motors/main.kicad_pcb
- SchematicKicad/motors/main.kicad_sch
TCAR Motor Board - L298P: common questions
How big is the TCAR Motor Board - L298P?
The TCAR Motor Board - L298P measures 80 × 140 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TCAR Motor Board - L298P?
135 components, from 42 distinct parts. The full bill of materials is listed on this page.
Where can I download the TCAR Motor Board - L298P design files?
From the tronixio/robot-tcar repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the TCAR Motor Board - L298P design in my own project?
The repository has no license, so all rights stay with tronixio. Use it as a reference, and ask the author before reusing the design.
More boards in robot-tcar
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979