Instru bab v2 ext
trublion·Boite_a_bourdon_control_board·cad/instru_bab_v2_ext.kicad_pcb
About the Instru bab v2 ext PCB
Instru bab v2 ext is an open source PCB design by trublion, published on GitHub under the MIT license. It is a 2-layer board measuring 60 × 30 mm, with 12 components from 11 distinct parts.
By type, the board carries 7 connectors, 2 diodes, 2 resistors and 1 transistor.
It belongs with the audio designs in this gallery.
From the project
HW control board for motorised hurgy-gurdy. Controls a DC motor with a half-H-bridge, reads an analog audio signal envelope, dual-PCB design.
Instru bab v2 ext bill of materials (BOM)
12 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PDTA123YT | SOT-23 | Q101 |
| 1 | CONN_LEDS_B | Pin_Header_Straight_1x06_Pitch2.54mm | J106 |
| 1 | CONN_SW_B | Pin_Header_Straight_1x06_Pitch2.54mm | J107 |
| 1 | PAD CONNB | Multicomp_sub-miniature_DPDT | J108 |
| 1 | CONN_01X09 | Pin_Header_Straight_1x09_Pitch2.54mm | J109 |
| 1 | GAIN POT | ALPS_RK09L | J110 |
| 1 | THRESHOLD POT | ALPS_RK09L | J111 |
| 1 | MIN POT | ALPS_RK09L | J115 |
| 1 | LED_POWER | Pin_Header_Straight_1x02_Pitch2.54mm | D101 |
| 1 | LED_SIGNAL | Pin_Header_Straight_1x02_Pitch2.54mm | D102 |
| 2 | 330 | R_0805 | R101, R106 |
Instru bab v2 ext design files
The KiCad project lives in the trublion/Boite_a_bourdon_control_board repository on GitHub; these links point at the commit this page was built from.
Instru bab v2 ext: common questions
How big is the Instru bab v2 ext PCB?
The Instru bab v2 ext measures 60 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Instru bab v2 ext?
12 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Instru bab v2 ext design files?
From the trublion/Boite_a_bourdon_control_board repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Instru bab v2 ext design in my own project?
Yes, under the terms of its MIT license, which trublion chose for the repository.
More boards in Boite_a_bourdon_control_board
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687