RAM adapter
About the RAM adapter PCB
RAM adapter is an open source PCB design by trwgQ26xxx, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 78 × 66.5 mm, with 14 components from 7 distinct parts.
Other key parts include the 74LVC1G04, HM62256BLP and 74LS573. By type, the board carries 6 capacitors, 3 ICs, 3 resistors, 1 connector and 1 diode.
From the project
Fiat Lancia Tester modules reader for ROMs preservation
Dedicated module reader for FLT\ART\CU-1 ROMs archiving.
Contact : trwgQ {leechers not welcome} 26 {remove spaces} xxx {remove spaces} {at} proton {dot} me
I do not consent to the use of all or part of the project for commercial purposes!
Nie wyrażam zgody na wykorzystanie całości bądź części projektu w celach zarobkowych!
Shield: [![CC BY-NC-SA 4.0][cc-by-nc-sa-shield]][cc-by-nc-sa]
Main components on the RAM adapter
RAM adapter bill of materials (BOM)
14 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LVC1G04 | SOT-23-5_HandSoldering | U1 |
| 1 | HM62256BLP | DIP_Socket-28_W11.9_W12.7_W15.24_W17.78_W18.5_3M_228-1277-00-0602J | U2 |
| 1 | 74LS573 | SOIC-20W_7.5x12.8mm_P1.27mm | U3 |
| 1 | RAM ADAPTER EXT | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Schottky | D_SMB_Handsoldering | D1 |
| 6 | 100n | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 3 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3 |
RAM adapter design files
The KiCad project lives in the trwgQ26xxx/FLT_module_reader repository on GitHub; these links point at the commit this page was built from.
RAM adapter: common questions
How big is the RAM adapter PCB?
The RAM adapter measures 78 × 66.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RAM adapter?
14 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the RAM adapter design files?
From the trwgQ26xxx/FLT_module_reader repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RAM adapter design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
