57 open source boards using the 74LS573
Real designs built with the 74LS573, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
M8SBC-486
maniekx86
150 × 150 mm123 parts4LNo license253Multi
homebrew8088
243.8 × 172.7 mm85 parts2LGPL-3.0238Z80-cmos nmos tester
djtersteegc
81.3 × 86.4 mm38 parts2LMIT61St251n 20603
schlae
137.4 × 199.1 mm277 parts4LNo license38Sg1000
barbeque
162.2 × 134.6 mm71 parts2LCC-BY-NC-4.033Multi
homebrew8088
184.2 × 219.2 mm92 parts2LGPL-3.027JJ65c02
jimjag
172.7 × 135.9 mm47 parts4LMIT25AVR/Arduino
Cat644
carangil
101.6 × 76.2 mm46 parts2LGPL-2.011Tom-1
tcr
127 × 127 mm83 parts4LNo license37-Segment LED Board
ja1umi
155 × 114 mm73 parts2LMIT3AVR/Arduino
Sbc 8088
miselin
243.8 × 243.8 mm206 parts4LCERN-OHL-P-2.02Z80-cmos nmos tester
Vakon84
81.3 × 86.4 mm38 parts2LMIT2Cpu8085
hotkeysoft
100 × 100 mm30 parts2LNo license2Ns32k timewarp
drelectro
203.2 × 218.4 mm409 parts4LMIT1AVR/Arduino
MDA80486SBC Final
mattheeewahn
150 × 150 mm123 parts4LGPL-3.01Mini-8085
89Mods
155.1 × 97.8 mm67 parts2LMIT1Intel 8088 Computer
oberrow
100 × 100 mm64 parts4LMIT18085-explorer
bazsimarkus
120 × 80 mm55 parts2LNo license1VT100
Roland-Scholz
99.1 × 99.1 mm33 parts2LNo license1AVR/Arduino
8bit
Haxintosh
214.7 × 238.3 mm468 parts2LCERN-OHL-P-2.00Proto1
ehbc-project
254 × 254 mm166 parts4LNo license0RP2040/RP2350
EVA1 v2
roberto314
218 × 125 mm141 parts2LNo license0AVR/Arduino
6502atty
bendooks
112.5 × 124.5 mm98 parts2LCERN-OHL-S-2.00RP2040/RP2350
C64 & VIC20 Flash Programmer Dave Gaunt
dgaunt48
100 × 100 mm80 parts2LNo license0RP2040/RP2350
Gb 1 0 pico
spaceape
152.4 × 69.9 mm79 parts2LNo license0Aniol64
vampirehunt2
160.3 × 74.8 mm54 parts2LNo license0AVR/Arduino
FLT ART CU1 Multicart
trwgQ26xxx
78 × 90 mm38 parts2LCC-BY-NC-4.00V40 64K 640K ISA
homebrew8088
145.8 × 91.4 mm23 parts2LGPL-3.0238St296n 20741
schlae
137.4 × 199.1 mm269 parts4LNo license388086
homebrew8088
216.4 × 106.7 mm42 parts2LGPL-3.027Motherboard
AndersBNielsen
144.8 × 94 mm37 parts2LNo license4AVR/Arduino
Digital board
minisystem
200 × 150 mm237 parts2LNo license3Prototype 8088
miselin
144.8 × 184.1 mm69 parts4LCERN-OHL-P-2.02RAM adapter
trwgQ26xxx
78 × 66.5 mm14 parts2LCC-BY-NC-4.02Cpu8085
nandgate
122.9 × 99.6 mm39 parts2LMIT1ESP32
Homebrew 486
kanaboid
150 × 150 mm123 parts4LNo license0
How designs wire the 74LS573
Read from the KiCad layouts of 40 open source designs, one per repository: what each pin of the 74LS573 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 19 of 40 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 10 | Connected to: GND 95% | — |
| VCCpin 20 | Connected to: 5V 88% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MCL64 by MicroCoreLabs, M8SBC-486 by maniekx86, 80188 by homebrew8088 and Z80-cmos nmos tester by djtersteegc.
The 74LS573 in open source designs
The gallery holds 57 open source boards using the 74LS573 from 40 GitHub repositories; a typical one measures about 137.4 × 99.6 mm and carries around 46 components.
75% are two-layer designs, the rest use four layers or more, and 47% carry an open source license.
The most starred is MCL64 by MicroCoreLabs.
Parts used alongside the 74LS573
Microcontrollers on boards using the 74LS573
What boards using the 74LS573 are built for
74LS573: common questions
Where can I find a 74LS573 reference design?
Each of the 57 boards on this page is a real design using the 74LS573. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS573 VCC pin?
The VCC pin has a decoupling capacitor on 19 of 40 designs, most often 100 nF. Counted from the KiCad layouts of 40 open source designs using the 74LS573.
What parts are used alongside the 74LS573?
The 74LS245, 74LS00, 74LS04, 74LS08 and 74LS138 appear in the most repositories here.
Which microcontrollers do boards using the 74LS573 use?
Most are built on AVR/Arduino (9), RP2040/RP2350 (3), NXP (2) and ESP32 (1).
How big is a typical board using the 74LS573?
The median is 137.4 × 99.6 mm, and 75% are two-layer designs.
What is the most popular open source board using the 74LS573?
By GitHub stars, MCL64 by MicroCoreLabs, with 532 stars.
Can I simulate one of these boards using the 74LS573 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.