33 open source boards using the HM62256BLP
Real designs built with the HM62256BLP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
TI99 22
danwerner21
350 × 224.3 mm242 parts2LNo license50ESP32
DevRamCart RevA
Danjovic
100 × 64.7 mm37 parts2LGPL-2.043MyCpu
fortinsylvain
194.5 × 188.6 mm156 parts4LMIT18AVR/Arduino
PC-6001 SD
yanataka60
79 × 127 mm17 parts2LMIT7Kraft80 REV2.2
ARMCoderBR
150.6 × 171.7 mm150 parts2LGPL-2.058088-mainboard
i-melnichenko
170 × 125 mm41 parts2LMIT5ESP32
TI99 22
danwerner21
244 × 244 mm257 parts4LNo license4Ifle3-symrna
barkolorious
184.9 × 112 mm27 parts2LNo license3AVR/Arduino
Sbc6502a1
tkhshmsy
95 × 100 mm36 parts2LMIT26502
justjoheinz
128.9 × 81.3 mm24 parts2LNo license2AVR/Arduino
TK-80BS SD
yanataka60
142.5 × 78 mm19 parts2LMIT2Huhhhh I didnt save
ethanjamesauto
229.9 × 93.3 mm365 parts2LNo license1Lomax ColorMagic Redux
RichCini
254 × 137.7 mm148 parts4LNo license18085-explorer
bazsimarkus
120 × 80 mm55 parts2LNo license1- schematic only · 69 parts
Yaufp8088
fifteenhex
69 partsGPL-3.01 AVR/Arduino
8bit
Haxintosh
214.7 × 238.3 mm468 parts2LCERN-OHL-P-2.00-816-board
snippyrow
182 × 138.8 mm137 parts2LMIT06502-min sbc
gcoonrod
100 × 100 mm48 parts4LApache-2.00Z80-computer v0
vaibhavvahbiav
133.8 × 140.8 mm47 parts10LMIT0- schematic only · 42 parts
COSMAC controller
quantalume
42 partsNo license0 AVR/Arduino
Programmer
benanderman
99.6 × 59.9 mm106 parts2LMIT59ESP32
DevRam
Danjovic
100 × 64.7 mm36 parts2LGPL-2.043TMS9918
michalin
100 × 100 mm20 parts2LGPL-3.041AlphaPlus
ARMCoderBR
150.6 × 110.4 mm78 parts2LGPL-2.05Motherboard
AndersBNielsen
144.8 × 94 mm37 parts2LNo license4RAM adapter
trwgQ26xxx
78 × 66.5 mm14 parts2LCC-BY-NC-4.02Processor attempt 1
ethanjamesauto
229.9 × 93.3 mm365 parts2LNo license1DEC DCJ11 Hack Plus RAM, ROM & Text Display
TechPaula
160 × 100 mm32 parts4LNo license7Processor attempt 3
ethanjamesauto
229.9 × 93.3 mm365 parts2LNo license1Processor attempt 4
ethanjamesauto
229.9 × 83.8 mm291 parts2LNo license1GIMIX 256k SRAM
roberto314
247.7 × 140.3 mm104 parts2LBSD-2-Clause1Z80
dennis9819
160 × 100.3 mm64 parts2LNo license2Processor attempt 2
ethanjamesauto
229.9 × 93.3 mm272 parts2LNo license1
How designs wire the HM62256BLP
Read from the KiCad layouts of 25 open source designs, one per repository: what each pin of the HM62256BLP connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 15 of 25 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 14 | Connected to: GND 100% | — |
| VCCpin 28 | Connected to: 5V 96% |
|
26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Programmer by benanderman, TI99 22 by danwerner21, DevRam by Danjovic and TMS9918 by michalin.
The HM62256BLP in open source designs
The gallery holds 33 open source boards using the HM62256BLP from 27 GitHub repositories; a typical one measures about 160 × 100 mm and carries around 64 components.
81% are two-layer designs, the rest use four layers or more, and 52% carry an open source license.
The most starred is Programmer by benanderman.
Parts used alongside the HM62256BLP
Microcontrollers on boards using the HM62256BLP
What boards using the HM62256BLP are built for
HM62256BLP: common questions
Where can I find a HM62256BLP reference design?
Each of the 33 boards on this page is a real design using the HM62256BLP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the HM62256BLP VCC pin?
The VCC pin has a decoupling capacitor on 15 of 25 designs, most often 100 nF. Counted from the KiCad layouts of 25 open source designs using the HM62256BLP.
What parts are used alongside the HM62256BLP?
The 28C256, 74LS32, 74LS04, 74LS08 and 74LS138 appear in the most repositories here.
Which microcontrollers do boards using the HM62256BLP use?
Most are built on AVR/Arduino (5) and ESP32 (3).
How big is a typical board using the HM62256BLP?
The median is 160 × 100 mm, and 81% are two-layer designs.
What is the most popular open source board using the HM62256BLP?
By GitHub stars, Programmer by benanderman, with 59 stars.
Can I simulate one of these boards using the HM62256BLP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.