Bny6xv2 pcb rev1
About the Bny6xv2 pcb rev1
Bny6xv2 pcb rev1 is an open source STM32 PCB design by Tsuiha, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 282.2 × 92.3 mm, with 149 components from 23 distinct parts.
Its main chip is the STM32F072CBTx, from the STM32 family. Other key parts include the CDSOT236-0504C and TLV75733PDBV. By type, the board carries 68 diodes, 67 switches, 7 capacitors, 3 ICs, 3 resistors and 1 connector.
From the project
BNY6X V2 is 60% KBD for MX or KS-33B switches, and compatible GH60 case.
Main components on the Bny6xv2 pcb rev1
Bny6xv2 pcb rev1 bill of materials (BOM)
149 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F072CBTx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | CDSOT236-0504C | sot-23-6-USBESD | U2 |
| 1 | TLV75733PDBV | SOT-23-5 | U3 |
| 1 | USB_C_Receptacle | USB_C_Receptacle_HRO_TYPE-C-31-M-12_My | J1 |
| 50 | SW_PUSH | GLPV3_1U | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +42 |
| 1 | SW_PUSH_2 | GLPV3_2u_r | SW14 |
| 2 | SW_PUSH_15 | GLPV3_1.5U | SW15, SW28 |
| 1 | SW_PUSH_175 | GLPV3_1.75U | SW29 |
| 1 | SW_PUSH_225 | GLPV3_2.25u | SW41 |
| 1 | SW_PUSH_225 | GLPV3_2.25u_r | SW42 |
| 1 | SW_PUSH_175 | MX_GLPV3_1.75U | SW54 |
| 4 | SW_PUSH_125 | GLPV3_1.25U | SW55, SW56, SW57, SW62 |
| 2 | SW_PUSH_15 | GLPV3_1U | SW58, SW60 |
| 1 | SW_PUSH_2 | GLPV3_1U | SW59 |
| 1 | SW_PUSH_125 | GLPV3_1U | SW61 |
| 1 | SW_SP3T_NR01103 | TMHU27 | SW66 |
| 1 | SW_Push | SW_SPST_SKQG_WithStem | SW67 |
| 68 | D | Diode_SMD_noname | D1, D2, D3, D4, D5, D6, D7, D8 +60 |
| 2 | 1u | C_0603_1608Metric | C1, C3 |
| 1 | 4.7u | C_0603_1608Metric | C2 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 100n | C_0603_1608Metric | C4, C5, C6, C7 |
| 2 | 5.1k | C_0603_1608Metric | R1, R2 |
| 1 | 10k | C_0603_1608Metric | R3 |
Bny6xv2 pcb rev1 design files
The KiCad project lives in the Tsuiha/BNY6XV2 repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/bny6xv2_pcb_rev1.kicad_pcb
- SchematicPCB/bny6xv2_pcb_rev1.kicad_sch
- BOMPCB/BOM.csv
Bny6xv2 pcb rev1: common questions
What microcontroller does the Bny6xv2 pcb rev1 use?
The Bny6xv2 pcb rev1 is built around the STM32F072CBTx, from the STM32 family.
How big is the Bny6xv2 pcb rev1?
The Bny6xv2 pcb rev1 measures 282.2 × 92.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bny6xv2 pcb rev1?
149 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Bny6xv2 pcb rev1 design files?
From the Tsuiha/BNY6XV2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Bny6xv2 pcb rev1 design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which Tsuiha chose for the repository.
Can I test firmware for the Bny6xv2 pcb rev1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in BNY6XV2
Similar boards
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32Module 16S
stuartpittaway
71.1 × 89.6 mm113 parts4LCC-BY-NC-4.01.1k
STM32Djinn
tzarc
192.3 × 150.5 mm216 parts2LCERN-OHL-S-2.0988
STM32Ghoul
228.6 × 79.4 mm163 parts2LCERN-OHL-S-2.0988