64 open source boards using the TLV75733PDBV
Real designs built with the TLV75733PDBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
HE60
peppapighs
284.7 × 94.2 mm252 parts2LGPL-3.0114STM32
Bldc motor cntroller
azmat-bilal
58 × 50 mm130 parts4LMIT112Raspberry Pi
Tv070wxm hat
ScandentLLC
56.5 × 65 mm44 parts4LCC0-1.0108ESP32
Feuchtraumabzweigdose
transportkollektiv
45.7 × 63.5 mm35 parts2LCC-BY-4.014RP2040/RP2350
Hardware
seedhammer
205.3 × 78 mm172 parts4LUnlicense9ESP32
Mesh hand
sneakylizard123-4
50 × 75 mm67 parts4LNo license8STM32
Faderbay
vonmartins
360 × 140 mm174 parts4LNo license4NXP
Enclosurefinal00
thenfour
59 × 69 mm117 parts2LNo license4STM32
Dreamscape-F722
sneakylizard123-4
40 × 40 mm104 parts4LNo license4RP2040/RP2350
Spica
illness072
3.4 × 3 mm72 parts2LCustom license3HE60
gohanda11
284.7 × 94.2 mm261 parts2LGPL-3.02RowLow52HE
sam1dare-kbd
242.3 × 104.1 mm197 parts2LGPL-3.0165HE
ZoharGalili
303.8 × 94.2 mm182 parts2LNo license1Chai45HE
gohanda11
238.1 × 76.2 mm174 parts2LGPL-3.01STM32
Bny6xv2 pcb rev1
Tsuiha
282.2 × 92.3 mm149 parts2LCC-BY-SA-4.01Pi-HAT-IO
iNkawuVervetProject
65 × 56 mm49 parts4LNo license1FN40HE
Mokeded
248 × 99.3 mm211 parts2LGPL-3.00STM32
STM32H743
sneakylizard123-4
100 × 75 mm162 parts6LCERN-OHL-P-2.00ESP32
Mega2560plus
sneakylizard123-4
53.3 × 101.6 mm138 parts4LNo license0ESP32
SAVITAR-V2
alexandru-mot
54.9 × 46.3 mm135 parts4LNo license0ESP32
BitcoinMiner
sneakylizard123-4
75 × 100 mm116 parts4LNo license0ESP32
Esp32MC
mauimart
96 × 60 mm99 parts4LNo license0ESP32
Grip strength meter
houseofbigseals
99 × 60 mm97 parts4LNo license0STM32
NSSFC
Keyaan-07
37 × 37 mm88 parts4LNo license0STM32
Dreamscape-F405-2020
sneakylizard123-4
32 × 35 mm83 parts6LNo license0RP2040/RP2350
ESP-HI-PLUS
dyu134
58 × 35 mm83 parts4LNo license0FPGA
FPGA Board
sneakylizard123-4
50 × 70 mm81 parts4LNo license0STM32
Nitingale b2 mechanical pcb rev1
Tsuiha
157.7 × 110.3 mm79 parts2LCC-BY-SA-4.00RP2040/RP2350
USB LED Ring
atuleu
94.5 × 75 mm76 parts2LCERN-OHL-S-2.00ESP32
Overkill nRF
sneakylizard123-4
50 × 75 mm73 parts4LNo license0ESP32
ESP32-C3-Low-Power-IoT-Plant-Node
mohamed-sebbar
59.5 × 29.9 mm65 parts4LCERN-OHL-W-2.00FTDIboard
sneakylizard123-4
50 × 75 mm60 parts4LNo license0ESP32
Rubber-Ducky
ishantmahatopro
33 × 90.3 mm49 parts2LNo license0ESP32
Guardian
kian09
55 × 40.1 mm49 parts2LNo license0ESP32
ESP32-S3 Module
sneakylizard123-4
30 × 73 mm48 parts4LNo license0ESP32
Display
Turboblider55
49.9 × 56.4 mm45 parts4LNo license0
How designs wire the TLV75733PDBV
Read from the KiCad layouts of 50 open source designs, one per repository: what each pin of the TLV75733PDBV connects to, and the resistors, capacitors and other passives placed on it.
- The NC_4 pin is left unconnected on 47 of 48 designs.
- The OUT_5 pin is tied to 3.3V on 47 of 50 designs (a signal on 3).
- The IN_1 pin is tied to 5V on 42 of 50 designs (a signal on 8).
- The EN_3 pin is tied to 5V on 36 of 50 designs (a signal on 13).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| IN_1pin 1 | Connected to: 5V 84% · a signal 16% | — |
| GND_2pin 2 | Connected to: GND 96% | — |
| EN_3pin 3 | Connected to: 5V 72% · a signal 26% | — |
| NC_4pin 4 | Connected to: Not connected 98% | — |
| OUT_5pin 5 | Connected to: 3.3V 94% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include HE60 by peppapighs, Bldc motor cntroller by azmat-bilal, Tv070wxm hat by ScandentLLC and Kicker Board by RoboJackets.
The TLV75733PDBV in open source designs
The gallery holds 64 open source boards using the TLV75733PDBV from 50 GitHub repositories; a typical one measures about 59 × 68.5 mm and carries around 79 components.
53% use four copper layers or more, and 38% carry an open source license.
The most starred is HE60 by peppapighs.
Parts used alongside the TLV75733PDBV
Microcontrollers on boards using the TLV75733PDBV
What boards using the TLV75733PDBV are built for
TLV75733PDBV: common questions
Where can I find a TLV75733PDBV reference design?
Each of the 64 boards on this page is a real design using the TLV75733PDBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TLV75733PDBV NC_4 pin connected?
The NC_4 pin is left unconnected on 47 of 48 designs. Counted from the KiCad layouts of 50 open source designs using the TLV75733PDBV.
How is the TLV75733PDBV OUT_5 pin connected?
The OUT_5 pin is tied to 3.3V on 47 of 50 designs (a signal on 3). Counted from the KiCad layouts of 50 open source designs using the TLV75733PDBV.
How is the TLV75733PDBV IN_1 pin connected?
The IN_1 pin is tied to 5V on 42 of 50 designs (a signal on 8). Counted from the KiCad layouts of 50 open source designs using the TLV75733PDBV.
What parts are used alongside the TLV75733PDBV?
The USBLC6-2SC6, W25Q128JVS, AT32F405RCT7, ESP32-S3-WROOM-1 and XC6206P332MR-G appear in the most repositories here.
Which microcontrollers do boards using the TLV75733PDBV use?
Most are built on ESP32 (20), RP2040/RP2350 (12), STM32 (12) and NXP (5).
How big is a typical board using the TLV75733PDBV?
The median is 59 × 68.5 mm, and 47% are two-layer designs.
What is the most popular open source board using the TLV75733PDBV?
By GitHub stars, HE60 by peppapighs, with 114 stars.
Can I simulate one of these boards using the TLV75733PDBV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.