47 open source boards using the STM32F072CBTx
Real designs built with the STM32F072CBTx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
OtterPill
Jana-Marie
43.2 × 17.6 mm42 parts2LCERN-OHL-S-2.0162STM32
Opensolder
howie-j
100 × 44 mm63 parts2LGPL-3.051STM32
Mx unsaver main
nearestexit
391.8 × 105.4 mm229 parts2LMIT40STM32
Libre-MIG
JustEnoughDucks
161.1 × 95 mm154 parts2LCERN-OHL-S-2.022STM32
Cypher
westfoxtrot
370.2 × 106 mm324 parts2LCC-BY-SA-4.020STM32
Ferret
fullyautomated
50 × 50 mm116 parts4LNo license20STM32
St40
coarse
226.1 × 73.9 mm110 parts2LCC-BY-SA-4.019STM32
Bonk
arko9699
155.5 × 2 mm71 parts2LGPL-3.018STM32
AlcatelLeft
nearestexit
278.7 × 117.2 mm109 parts2LMIT16STM32
STM32-Reference-Keyboard
AeternusCo
38.1 × 38.9 mm46 parts2LUnlicense16STM32
Tiny-Dimply-Qazy
ASH-ART
200 × 76.2 mm90 parts2LGPL-3.015STM32
Pcb
CoffeeBreakKeyboards
234.7 × 91.6 mm95 parts2LNo license6STM32
OtterStepMini
Jana-Marie
68.4 × 50 mm63 parts4LNo license5ESP32
Hactar PCB - Finn Berg & Brett Regnier
Quicr
71.5 × 91 mm203 parts4LBSD-2-Clause3STM32
OPS
Jana-Marie
49 × 34 mm98 parts2LNo license3STM32
Equanimity
TyraelWasTaken
366.9 × 117 mm150 parts2LMIT2STM32
AccelerationDataLogger
Toroid-io
78.1 × 78.7 mm85 parts2LGPL-3.02STM32
Bny6xv2 pcb rev1
Tsuiha
282.2 × 92.3 mm149 parts2LCC-BY-SA-4.01STM32
Borsdorf
Cutie-Club
314.3 × 95.3 mm128 parts2LCC-BY-SA-4.01STM32
Same60xt
setsooner
332.5 × 94.4 mm88 parts2LCC-BY-NC-4.01STM32
Analog noise
BBBSnowball
12.7 × 45.6 mm68 parts4LNo license1STM32
MacOS-Keyboard
CalamityCow
432.2 × 143 mm440 parts2LNo license0STM32
Quokka
ChrisPVille
228.6 × 184.2 mm331 parts4LApache-2.00STM32
Uni60 Solder
ShentoBento
284.7 × 94.2 mm176 parts2LNo license0STM32
Velvet-Pro-Solder
ShentoBento
280.7 × 95.2 mm149 parts2LNo license0STM32
Choccy47
leenknegt-eu
227 × 75.4 mm115 parts2LCustom license0STM32
ANUFS-APPPD
chithigun23
58.9 × 48.4 mm99 parts4LNo license0STM32
Mk0
yixinyxl
172 × 118.3 mm93 parts2LNo license0STM32
Nitingale b2 mechanical pcb rev1
Tsuiha
157.7 × 110.3 mm79 parts2LCC-BY-SA-4.00STM32
ANUFS-GearPositionSTM
chithigun23
108.8 × 50.9 mm54 parts4LNo license0STM32
Klyr f072
dialgorithm
65 × 30 mm31 parts2LNo license0- schematic only · 69 partsSTM32
OpenFanHub
rolo-r
69 partsNo license0 - schematic only · 69 partsSTM32
Openfanhub
rolo-r
69 partsNo license0 STM32
OtterPillG
Jana-Marie
43.2 × 17.6 mm37 parts2LCERN-OHL-S-2.0162STM32
Libre-MIG-rounded
JustEnoughDucks
161.1 × 95 mm154 parts2LCERN-OHL-S-2.022ESP32
Hactar PCB - Finn Berg, Brett Regnier
Quicr
125 × 80 mm173 parts4LBSD-2-Clause3
How designs wire the STM32F072CBTx
Read from the KiCad layouts of 34 open source designs, one per repository: what each pin of the STM32F072CBTx connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pins have a decoupling capacitor on 33 of 34 designs, most often 100 nF (then 4.7 µF).
- The VDDIO2 pin has a decoupling capacitor on 31 of 34 designs, most often 100 nF (then 4.7 µF).
- The VDDA pin has a decoupling capacitor on 30 of 34 designs, most often 100 nF (then 1 µF).
- The VBAT pin has a decoupling capacitor on 28 of 34 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 88% |
|
| PC13pin 2 | Connected to: Not connected 65% · a signal 32% | — |
| PC14pin 3 | Connected to: Not connected 65% · a signal 32% | — |
| PC15pin 4 | Connected to: Not connected 65% · a signal 32% | — |
| PF0pin 5 | Connected to: Signal 59% · not connected 41% |
|
| NRSTpin 7 | Connected to: A connector 35% |
|
| VSSApin 8 | Connected to: GND 100% | — |
| VDDApin 9 | Connected to: 3.3V 94% |
|
| VSSpin 23, 35, 47 | Connected to: GND 100% | — |
| VDDpin 24, 48 | Connected to: 3.3V 97% |
|
| VDDIO2pin 36 | Connected to: 3.3V 97% |
|
| BOOT0pin 44 | Connected to: Signal 94% |
|
33 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OtterPill by Jana-Marie, Opensolder by howie-j, Mx unsaver main by nearestexit and Libre-MIG by JustEnoughDucks.
The STM32F072CBTx in open source designs
The gallery holds 47 open source boards using the STM32F072CBTx from 37 GitHub repositories; a typical one measures about 157.7 × 91.6 mm and carries around 98 components.
82% are two-layer designs, the rest use four layers or more, and 53% carry an open source license.
The most starred is OtterPill by Jana-Marie.
Parts used alongside the STM32F072CBTx
What boards using the STM32F072CBTx are built for
STM32F072CBTx: common questions
Where can I find a STM32F072CBTx reference design?
Each of the 47 boards on this page is a real design using the STM32F072CBTx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the STM32F072CBTx VDD pin?
The VDD pins have a decoupling capacitor on 33 of 34 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 34 open source designs using the STM32F072CBTx.
What decoupling capacitors do designs use on the STM32F072CBTx VDDIO2 pin?
The VDDIO2 pin has a decoupling capacitor on 31 of 34 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 34 open source designs using the STM32F072CBTx.
What decoupling capacitors do designs use on the STM32F072CBTx VDDA pin?
The VDDA pin has a decoupling capacitor on 30 of 34 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 34 open source designs using the STM32F072CBTx.
What parts are used alongside the STM32F072CBTx?
The USBLC6-2SC6, XC6206PXXXMR, USBLC6-2P6, USBLC6-4 and XC6206P332MR appear in the most repositories here.
Which microcontrollers do boards using the STM32F072CBTx use?
Most are built on STM32 (45) and ESP32 (2).
How big is a typical board using the STM32F072CBTx?
The median is 157.7 × 91.6 mm, and 82% are two-layer designs.
What is the most popular open source board using the STM32F072CBTx?
By GitHub stars, OtterPill by Jana-Marie, with 162 stars.
Can I simulate one of these boards using the STM32F072CBTx before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.