DAQ Main Board
tuftselectricracing·FormulaHybrid2020·daq/MAIN_daq.kicad_pcb
About the DAQ Main Board
DAQ Main Board is an open source NXP PCB design by tuftselectricracing, published on GitHub. It is a 2-layer board measuring 116.2 × 57 mm, with 26 components from 19 distinct parts.
Its main chip is the Teensy4.0, from the NXP family. Other key parts include the LM7805_TO220 and MCP2551-I-P. By type, the board carries 9 fuses, 9 resistors, 3 ICs, 3 connectors and 2 capacitors.
From the project
Files and such for Hormula Hybrid 2020
Main components on the DAQ Main Board
DAQ Main Board bill of materials (BOM)
26 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Teensy4.0 | Teensy40 | U1 |
| 1 | LM7805_TO220 | TO-220-3_Horizontal_TabDown | U2 |
| 1 | MCP2551-I-P | DIP-8_W7.62mm | U3 |
| 2 | Conn_01x14_Male | TE_776266-1 | J1, J2 |
| 1 | Conn_02x20_Odd_Even_RPi | PinHeader_2x20_P2.54mm_Vertical | J3 |
| 1 | DIN1_FUSE | Fuseholder_Blade_Mini_Keystone_3568 | F1 |
| 1 | AIN1_FUSE | Fuseholder_Blade_Mini_Keystone_3568 | F2 |
| 1 | AIN2_FUSE | Fuseholder_Blade_Mini_Keystone_3568 | F3 |
| 1 | DIN2_FUSE | Fuseholder_Blade_Mini_Keystone_3568 | F4 |
| 1 | DIN3_Fuse | Fuseholder_Blade_Mini_Keystone_3568 | F5 |
| 1 | AIN3_FUSE | Fuseholder_Blade_Mini_Keystone_3568 | F6 |
| 1 | AIN4_FUSE | Fuseholder_Blade_Mini_Keystone_3568 | F7 |
| 1 | DIN4_FUSE | Fuseholder_Blade_Mini_Keystone_3568 | F8 |
| 1 | RPi_FUSE | Fuseholder_Blade_Mini_Keystone_3568 | F9 |
| 1 | 0.33uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 0.1uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2 |
| 4 | 59k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R7, R9 |
| 4 | 22k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R11, R12 |
| 1 | 120 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
DAQ Main Board design files
The KiCad project lives in the tuftselectricracing/FormulaHybrid2020 repository on GitHub; these links point at the commit this page was built from.
- Layoutdaq/MAIN_daq.kicad_pcb
DAQ Main Board: common questions
What microcontroller does the DAQ Main Board use?
The DAQ Main Board is built around the Teensy4.0, from the NXP family.
How big is the DAQ Main Board?
The DAQ Main Board measures 116.2 × 57 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DAQ Main Board?
26 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the DAQ Main Board design files?
From the tuftselectricracing/FormulaHybrid2020 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the DAQ Main Board design in my own project?
The repository has no license, so all rights stay with tuftselectricracing. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the DAQ Main Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in FormulaHybrid2020
Similar boards
NXP
32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763NXP
Mega-Cube-Board
MaltWhiskey
200 × 54 mm100 parts4LNo license763NXP
MCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532NXP
MCL68
MicroCoreLabs
31.6 × 84.1 mm13 parts4LNo license532NXP
MCL65+
MicroCoreLabs
72.6 × 64.1 mm6 parts2LNo license532NXP
MCLZ8
MicroCoreLabs
37.1 × 61.5 mm6 parts4LNo license532