Steering Wheel Main Board

tuftselectricracing·FormulaHybrid2020·steeringWheel/steeringWheelPCB/TEST_newWheelBoard.kicad_pcb

Steering Wheel Main Board layout, top view — open source NXP board by tuftselectricracing

About the Steering Wheel Main Board

Steering Wheel Main Board is an open source NXP PCB design by tuftselectricracing, published on GitHub. It is a 2-layer board measuring 85 × 58 mm, with 38 components from 29 distinct parts.

Its main chip is the Teensy4.0, from the NXP family. Other key parts include the SN74HC595N_SHIFT_REG_1, SN74HC595N_SHIFT_REG_2, LD1117S33TR_SOT223, LM7805_TO220 and MCP2551-I-P. By type, the board carries 14 connectors, 12 resistors, 6 ICs and 6 capacitors.

From the project

Files and such for Hormula Hybrid 2020

Main components on the Steering Wheel Main Board

SN74HC595N_SHIFT_REG_1SN74HC595N_SHIFT_REG_2Teensy4.0LD1117S33TR_SOT223LM7805_TO220MCP2551-I-P

Steering Wheel Main Board bill of materials (BOM)

38 components, 29 distinct parts.

QtyPartRefs
1
SN74HC595N_SHIFT_REG_1
U1
1
SN74HC595N_SHIFT_REG_2
U2
1
Teensy4.0
U3
1
LD1117S33TR_SOT223
U4
1
LM7805_TO220
U5
1
MCP2551-I-P
U6
1
Conn_01x20_Female_OLED
J1
1
Conn_01x09_Female_LED_Right
J2
1
Conn_01x09_Female_LED_Left
J3
1
Conn_01x06_Female_Abs_Pos
J4
1
Conn_02x01_Yellow
J5
1
Conn_02x01_IMD_LED
J6
1
Conn_02x06_Steering_Wheel_Quick_Release
J7
1
Conn_01x03_Two_Pos_Switch
J8
1
Conn_01x03_Single_Pos_Switch
J9
1
Conn_02x01_Left_Black
J10
1
Conn_02x01_Blue
J11
1
Conn_02x01_Green
J12
1
Conn_02x01_Red
J13
1
Conn_02x01_Right_Black
J14
Show 9 more
QtyPartRefs
1
220uF
C1
1
22uF
C2
2
0.1uF
C3, C6
1
0.33uF
C4
1
100uF
C5
1
330
R1
1
33k
R2
9
22k
R3, R4, R5, R6, R7, R8, R9, R10 +1
1
120
R12

Steering Wheel Main Board design files

The KiCad project lives in the tuftselectricracing/FormulaHybrid2020 repository on GitHub; these links point at the commit this page was built from.

Steering Wheel Main Board: common questions

What microcontroller does the Steering Wheel Main Board use?

The Steering Wheel Main Board is built around the Teensy4.0, from the NXP family.

How big is the Steering Wheel Main Board?

The Steering Wheel Main Board measures 85 × 58 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Steering Wheel Main Board?

38 components, from 29 distinct parts. The full bill of materials is listed on this page.

Where can I download the Steering Wheel Main Board design files?

From the tuftselectricracing/FormulaHybrid2020 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Steering Wheel Main Board design in my own project?

The repository has no license, so all rights stay with tuftselectricracing. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Steering Wheel Main Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in FormulaHybrid2020

Similar boards