Pmod DC-motor driver
TVavrinec·Pmod_DC-motor-driver·hw/Pmod_DC-motor-driver/Pmod_DC-motor-driver.kicad_pcb
About the Pmod DC-motor driver PCB
Pmod DC-motor driver is an open source PCB design by TVavrinec, published on GitHub. It is a 2-layer board measuring 37.7 × 16.9 mm, with 24 components from 12 distinct parts.
Other key parts include the DRV8833. By type, the board carries 11 resistors, 6 capacitors, 3 connectors, 2 diodes, 1 IC and 1 jumper.
It belongs with the robotics & motion designs in this gallery.
From the project
The power ENC jumper serves as an option to disconnect the 5V power supply from the motor connector for ENCs that are not 5V tolerant. In normal mode you need to connect a jumper.

Main components on the Pmod DC-motor driver
Pmod DC-motor driver bill of materials (BOM)
24 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DRV8833 | HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm_ThermalVias | U6 |
| 2 | Encoder | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J1, J6 |
| 1 | Conn_02x06_Odd_Even | PinHeader_2x06_P2.54mm_Horizontal | J8 |
| 1 | Jumper_2_Bridged | PinHeader_1x02_P2.54mm_Vertical | JP4 |
| 2 | LED | LED_0603_1608Metric | D1, D2 |
| 4 | 10u | C_0603_1608Metric | C1, C12, C13, C14 |
| 1 | 0.1u | C_0402_1005Metric | C11 |
| 1 | 2.2uF | C_0603_1608Metric | C15 |
| 1 | 470 | R_0603_1608Metric | R1 |
| 1 | 1k | R_0603_1608Metric | R2 |
| 5 | 10k | R_0402_1005Metric | R3, R8, R9, R10, R24 |
| 4 | 4k7 | R_0402_1005Metric | R4, R5, R6, R7 |
Pmod DC-motor driver design files
The KiCad project lives in the TVavrinec/Pmod_DC-motor-driver repository on GitHub; these links point at the commit this page was built from.
Pmod DC-motor driver: common questions
How big is the Pmod DC-motor driver PCB?
The Pmod DC-motor driver measures 37.7 × 16.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pmod DC-motor driver?
24 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pmod DC-motor driver design files?
From the TVavrinec/Pmod_DC-motor-driver repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pmod DC-motor driver design in my own project?
The repository has no license, so all rights stay with TVavrinec. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979