Buck-Converter
TylerK1551·Buck-Converter
About the Buck-Converter PCB
Buck-Converter is an open source PCB design by TylerK1551, published on GitHub. It is a 2-layer board measuring 55 × 58 mm, with 19 components from 17 distinct parts.
Other key parts include the ISL6545A. By type, the board carries 8 capacitors, 5 resistors, 2 transistors, 2 connectors, 1 IC and 1 inductor.
It belongs with the power & battery designs in this gallery.
From the project
Buck converter PCB using an ISL6545A controller chip
A 5V, 3A synchronous buck converter built around the Renesas ISL6545A voltage-mode PWM controller with external MOSFETs, designed end to end in KiCad.
I took this board from schematic capture through a custom controller symbol, footprint and 3D model assignment, two-layer placement and routing, DRC, and fabrication outputs. Most of the design effort went into the layout decisions that make or break a switching converter: the hot loop, the switch node, the ground plane, and the feedback path.
Main components on the Buck-Converter
Buck-Converter bill of materials (BOM)
19 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ISL6545A | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 2 | Q_NMOS_GDS | TO-252-2 | Q1, Q2 |
| 2 | Conn_01x02 | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1, J2 |
| 1 | 4.7uH | L_Bourns_SRP7028A_7.3x6.6mm | L1 |
| 1 | 1.5nF | C_0603_1608Metric | C1 |
| 1 | 22nF | C_0603_1608Metric | C2 |
| 1 | 1uF | C_0805_2012Metric | C3 |
| 1 | 0.1uF | C_0603_1608Metric | C4 |
| 1 | 15nF | C_0603_1608Metric | C5 |
| 1 | 330uF | CP_Elec_10x7.9 | C6 |
| 1 | 100uF | CP_Elec_8x10 | C7 |
| 1 | 10uF | C_1206_3216Metric | C8 |
| 1 | 3.3k | R_0603_1608Metric | R1 |
| 1 | 300 | R_0603_1608Metric | R2 |
| 1 | 22 | R_0603_1608Metric | R3 |
| 1 | 2.2k | R_0603_1608Metric | R4 |
| 1 | 1.5k | R_0603_1608Metric | R5 |
Buck-Converter design files
The KiCad project lives in the TylerK1551/Buck-Converter repository on GitHub; these links point at the commit this page was built from.
- LayoutBuck Converter.kicad_pcb
- SchematicBuck Converter.kicad_sch
Buck-Converter: common questions
How big is the Buck-Converter PCB?
The Buck-Converter measures 55 × 58 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Buck-Converter?
19 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Buck-Converter design files?
From the TylerK1551/Buck-Converter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Buck-Converter design in my own project?
The repository has no license, so all rights stay with TylerK1551. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k