NegativeVoltageModule
TzarRusi·NegativeVoltageModule
About the NegativeVoltageModule PCB
NegativeVoltageModule is an open source PCB design by TzarRusi, published on GitHub. It is a 2-layer board measuring 97 × 150 mm, with 47 components from 12 distinct parts.
Other key parts include the AMS1117-5.0 and lt3090emse#pbf. By type, the board carries 14 capacitors, 5 ICs and 4 connectors.
It belongs with the power & battery designs in this gallery.
From the project
Четырёхканальная плата отрицательного питания на LT3090 — KiCad, схемы, PCB, BOM, CAD-рендеры и конструктив SolidWorks.
Автор: Владислав Чернухин · Инженерное портфолио
Специализированная четырёхканальная плата отрицательного питания для лабораторных задач. Мой вклад — разработка схемотехники и топологии платы на LT3090. В репозитории собраны редактируемые исходники, схема, BOM и материалы конструктива.
Общая схема · Схема одного канала · Верхний слой PCB
1. Скачайте репозиторий целиком и откройте NegativeVoltageModule.kicadpro в KiCad (исходный формат — KiCad 7; просмотр и экспорт проверены в KiCad 10). 2. Для редактирования библиотечных компонентов распакуйте custom-library.zip в корень репозитория…

Main components on the NegativeVoltageModule
NegativeVoltageModule bill of materials (BOM)
47 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-5.0 | SOT-223-3_TabPin2 | U1 |
| 4 | lt3090emse#pbf LT3090EMSE_PBF | MSOP-12_MSE | U2, U3, U4, U5 |
| 4 | Conn_Coaxial | SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | J3, J4, J5, J6 |
| 4 | Voltmeter_DC | SolderWire-0.1sqmm_1x03_P3.6mm_D0.4mm_OD1mm_Relief2x | MES1, MES3, MES5, MES7 |
| 4 | Ammeter_DC | SolderWire-0.5sqmm_1x02_P4.8mm_D0.9mm_OD2.3mm_Relief2x | MES2, MES4, MES6, MES8 |
| 4 | Rv09 500k | Potentiometer_Alps_RK09K_Single_Vertical | RV1, RV2, RV3, RV4 |
| 4 | R-09 1K | Potentiometer_Alps_RK09K_Single_Vertical | RV5, RV6, RV7, RV8 |
| 8 | Rv09 10k | Potentiometer_Alps_RK09K_Single_Vertical | RV9, RV10, RV11, RV12, RV13, RV14, RV15, RV16 |
| 1 | 10u 35V | CP_Elec_5x5.4 | C1 |
| 5 | 22u 35V | CP_Elec_6.3x5.4 | C2, C4, C6, C8, C10 |
| 4 | CC1206KKX7R8BB106 10u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C5, C7, C9 |
| 4 | GRM155R71C104KA88D 0.1u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C11, C12, C13, C14 |
NegativeVoltageModule design files
The KiCad project lives in the TzarRusi/NegativeVoltageModule repository on GitHub; these links point at the commit this page was built from.
NegativeVoltageModule: common questions
How big is the NegativeVoltageModule PCB?
The NegativeVoltageModule measures 97 × 150 mm, has 2 copper layers and is 1.57 mm thick.
How many components are on the NegativeVoltageModule?
47 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the NegativeVoltageModule design files?
From the TzarRusi/NegativeVoltageModule repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the NegativeVoltageModule design in my own project?
The repository has no license, so all rights stay with TzarRusi. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k