IoT curtain and light
tzf230201·iot_curtain_and_light·IoT_curtain_and_light/IoT_curtain_and_light.kicad_pcb
About the IoT curtain and light PCB
IoT curtain and light is an open source ESP8266 PCB design by tzf230201, published on GitHub. It is a 2-layer board measuring 154.3 × 119.4 mm, with 23 components from 11 distinct parts.
Its main chip is the Wemos_D1_R2, from the ESP8266 family. Other key parts include the UBEC_Regulator. By type, the board carries 10 connectors, 6 resistors, 2 ICs, 1 module, 1 switch and 1 diode.
It belongs with the iot & wireless designs in this gallery.
From the project
An IoT device for controlling curtains, main lighting and an RGB ambient light, using an ESP8266 as the main controller and controllable via Telegram.
This project demonstrates an IoT device that controls a curtain motor, main lights, and an ambient light (which can also function as a sleep lamp). The device is powered by an ESP8266 microcontroller and integrates the Universal Telegram Bot library for remote control. The system offers four different modes of operation for flexible and convenient usage.
- ESP8266-Based Control: Enables wireless communication and control using the ESP8266 microcontroller. - Telegram Bot Integration: Allows real-time remote control via a dedicated Telegram bot. - Four Operation Modes: 1. Button Control…

Main components on the IoT curtain and light
IoT curtain and light bill of materials (BOM)
23 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Wemos_D1_R2 | wemos_d1_r2 | U1 |
| 1 | ~ | level_converter | U2 |
| 1 | UBEC_Regulator | UBEC_Reg | A1 |
| 1 | Barrel_Jack_Switch | BarrelJack_Horizontal | J1 |
| 7 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J2, J3, J6, J7, J8, J9, J10 |
| 1 | Conn_01x06 | PinSocket_1x06_P2.54mm_Vertical | J4 |
| 1 | Conn_01x03 | PinSocket_1x03_P2.54mm_Vertical | J5 |
| 2 | ~ | Relay_Module_2CH | Relay_Module_2CH_1, Relay_Module_2CH_2 |
| 1 | SW_Omron_B3FS | SW_PUSH_6mm | SW1 |
| 1 | LED_RGKB | LED_D5.0mm-4_RGB | D2 |
| 6 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6 |
IoT curtain and light design files
The KiCad project lives in the tzf230201/iot_curtain_and_light repository on GitHub; these links point at the commit this page was built from.
IoT curtain and light: common questions
What microcontroller does the IoT curtain and light use?
The IoT curtain and light is built around the Wemos_D1_R2, from the ESP8266 family.
How big is the IoT curtain and light PCB?
The IoT curtain and light measures 154.3 × 119.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IoT curtain and light?
23 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the IoT curtain and light design files?
From the tzf230201/iot_curtain_and_light repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the IoT curtain and light design in my own project?
The repository has no license, so all rights stay with tzf230201. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the IoT curtain and light without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398