Dps v0

UbiTrich·home-assistant-poe-satellite·hardware/dps_v0/dps_v0.kicad_pcb

Dps v0 PCB layout, top view — open source board by UbiTrich

About the Dps v0 PCB

Dps v0 is an open source PCB design by UbiTrich, published on GitHub. It is a 2-layer board measuring 70 × 80 mm, with 23 components from 19 distinct parts.

By type, the board carries 11 capacitors, 6 connectors, 5 resistors and 1 diode.

It belongs with the rf & radio and iot & wireless designs in this gallery.

From the project

ESP32-S3 PoE voice satellite for Home Assistant

Dps v0 bill of materials (BOM)

23 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SI-46020-F
Right
J1
1
USB_C_RECEPTACLE_USB2.0_16P
Left
J2
1
PIR
J3
1
Mmwave
J4
1
MIC_Left
J7
1
MIC_Right
J8
1
MB6S
LED_BGKR
D1
1
100U
100n
C1
2
100N
10u
C2, C9
1
22U
100n
C3
2
10U
100n
C4, C6
1
100N
10n
C5
1
4.7U
10u
C7
1
10N
100n
C8
1
10U
1u
C11
1
18P
100n
C12
1
10k
R1
3
330
R2, R3, R4
1
12.4K
R_Photo
R5

Dps v0 design files

The KiCad project lives in the UbiTrich/home-assistant-poe-satellite repository on GitHub; these links point at the commit this page was built from.

Dps v0: common questions

How big is the Dps v0 PCB?

The Dps v0 measures 70 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Dps v0?

23 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Dps v0 design files?

From the UbiTrich/home-assistant-poe-satellite repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Dps v0 design in my own project?

The repository has no license, so all rights stay with UbiTrich. Use it as a reference, and ask the author before reusing the design.

More boards in home-assistant-poe-satellite

Similar boards