Dps satelite

UbiTrich·home-assistant-poe-satellite·hardware/dps_satelite/dps_satelite.kicad_pcb

Dps satelite PCB layout, top view — open source ESP32 board by UbiTrich

About the Dps satelite PCB

Dps satelite is an open source ESP32 PCB design by UbiTrich, published on GitHub. It is a 4-layer board measuring 80 × 80 mm, with 92 components from 43 distinct parts.

Its main chip is the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family. Other key parts include the IRS-D200ST00R1, W5500, USBLC6-2SC6, AG9905LP and AMS1117-3.3. By type, the board carries 40 capacitors, 31 resistors, 7 ICs, 5 connectors, 3 diodes and 2 switches.

It belongs with the iot & wireless and rf & radio designs in this gallery.

From the project

ESP32-S3 PoE voice satellite for Home Assistant

Main components on the Dps satelite

Dps satelite bill of materials (BOM)

92 components, 43 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1U-N16R8
IC1
1
IRS-D200ST00R1
IC2
1
W5500
U1
1
USBLC6-2SC6
U2
1
AG9905LP
Ag9905LP
U3
1
AMS1117-3.3
U4
1
TPS2116DRL
U5
1
CRYSTAL_GND24
Crystal_GND24
Y1
1
SI-46020-F
J1
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J2
1
Mmwave
J3
1
MIC_L
J4
1
MIC_R
J5
1
Polyfuse 750mA
F1
1
Restart
SW1
1
Boot
SW2
1
ASMT-YTD2-0BB02
LED1
1
MB6S
D1
1
SMAJ58CA
D2
1
LED
D4
Show 23 more
QtyPartRefs
1
FerriteBead
FB1
2
100U
100u
C1, C31
20
100N
100n
C2, C5, C9, C10, C14, C17, C19, C22 +12
1
22U
22u
C3
7
10U
10u
C4, C6, C15, C18, C20, C30, C34
1
4.7U
4.7u
C7
1
10N
10n
C8
2
10U
10u
C11, C21
2
18P
18p
C12, C13
1
1u
C16
1
4.7nF 2kV
C38
1
4.7nF 2kV
C39
1
1nF 2kV
C40
4
33
R1, R2, R3, R4
1
12.4K
12.4k
R5
3
1M
R6, R29, R30
10
10K
10k
R7, R8, R9, R14, R16, R17, R23, R24 +2
5
330
R10, R11, R12, R20, R21
1
R_Photo
R13
2
22
R15, R22
2
3k
R18, R19
2
100K
100k
R26, R27
1
0
R28

Dps satelite design files

The KiCad project lives in the UbiTrich/home-assistant-poe-satellite repository on GitHub; these links point at the commit this page was built from.

Dps satelite: common questions

What microcontroller does the Dps satelite use?

The Dps satelite is built around the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family.

How big is the Dps satelite PCB?

The Dps satelite measures 80 × 80 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Dps satelite?

92 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Dps satelite design files?

From the UbiTrich/home-assistant-poe-satellite repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Dps satelite design in my own project?

The repository has no license, so all rights stay with UbiTrich. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Dps satelite without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in home-assistant-poe-satellite

Similar boards