FlatSat Breakout
About the FlatSat Breakout
FlatSat Breakout is an open source PCB design by UChicago-Space-Program, published on GitHub. It is a 2-layer board measuring 100 × 93.8 mm, with 50 components from 19 distinct parts.
By type, the board carries 18 connectors, 14 test points, 9 diodes and 9 resistors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
This is the central repository for documents related to PULSE-A hardware development.
FlatSat Breakout bill of materials (BOM)
50 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_02X26_ODD_EVEN Conn_01x10 | PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | CONN_02X26_ODD_EVEN Conn_01x01 | Banana_Jack_1Pin | J2 |
| 1 | CONN_01X02 Conn_01x01 | Banana_Jack_1Pin | J3 |
| 2 | CONN_01X02 Conn_01x02 | TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J4, J5 |
| 2 | CONN_01X02 Conn_01x10 | PinHeader_1x10_P2.54mm_Vertical | J6, J8 |
| 4 | Conn_01x10 | PinHeader_1x10_P2.54mm_Vertical | J7, J9, J10, J14 |
| 3 | CONN_01X04 Conn_01x10 | PinHeader_1x10_P2.54mm_Vertical | J11, J12, J13 |
| 1 | CONN_01X02 Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J15 |
| 3 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J16, J17, J18 |
| 14 | TestPoint | TestPoint_Keystone_5000-5004_Miniature | TP1, TP12, TP13, TP14, TP15, TP16, TP17, TP18 +6 |
| 4 | 150060VS75000 LED | LED_0603_1608Metric | D1, D2, D3, D7 |
| 3 | 150060AS75000 LED | LED_0603_1608Metric | D4, D5, D6 |
| 2 | PMEG10020ELRX LED | LED_0603_1608Metric | D8, D9 |
| 1 | 100K 1k | R_0603_1608Metric | R1 |
| 2 | 18.2K 1k | R_0603_1608Metric | R2, R7 |
| 2 | 1k | R_0603_1608Metric | R3, R8 |
| 2 | 243K 1k | R_0603_1608Metric | R4, R9 |
| 1 | 110K 1k | R_0603_1608Metric | R5 |
| 1 | 412K 1k | R_0603_1608Metric | R6 |
FlatSat Breakout design files
The KiCad project lives in the UChicago-Space-Program/pulse-hardware repository on GitHub; these links point at the commit this page was built from.
FlatSat Breakout: common questions
How big is the FlatSat Breakout?
The FlatSat Breakout measures 100 × 93.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FlatSat Breakout?
50 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the FlatSat Breakout design files?
From the UChicago-Space-Program/pulse-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the FlatSat Breakout design in my own project?
The repository has no license, so all rights stay with UChicago-Space-Program. Use it as a reference, and ask the author before reusing the design.
More boards in pulse-hardware
STM32PowerDistribution
90.2 × 96 mm183 parts4LNo license1
PCDU Load Tester v1
124 × 67.5 mm60 parts4LNo license1
Batt Boardv1
90.2 × 95.9 mm55 parts2LNo license1
RealQuadcellAmp
75.6 × 76.1 mm48 parts2LNo license1
QuadcellAmp
80 × 50 mm41 parts2LNo license1
TI MSP430/CCFight Computer Motherboard - Ian Goldberg
90.2 × 96 mm31 parts4LNo license1
Batteryboard
90.2 × 95.9 mm24 parts2LNo license1
PDU Breakout
99.5 × 43.5 mm16 parts2LNo license1
BOBPrototype
91.3 × 90.3 mm9 parts2LNo license1
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979