HardLabs

Fight Computer Motherboard - Ian Goldberg

UChicago-Space-Program·pulse-hardware·logos-templates-tools/BeagleBonePC104/BeagleBonePC104.kicad_pcb

Fight Computer Motherboard - Ian Goldberg PCB layout, top view — open source TI MSP430/CC board by UChicago-Space-Program

About the Fight Computer Motherboard - Ian Goldberg PCB

Fight Computer Motherboard - Ian Goldberg is an open source TI MSP430/CC PCB design by UChicago-Space-Program, published on GitHub. It is a 4-layer board measuring 90.2 × 96 mm, with 31 components from 30 distinct parts.

Its main chip is the QFN50P400X400X100-25N, from the TI MSP430/CC family. Other key parts include the LT8610, W25N01GVZEIG_TR, TJA1051T-3, TMP36xS and MAX14662. By type, the board carries 10 ICs, 10 resistors, 5 diodes, 2 test points, 1 transistor and 1 battery holder.

From the project

This is the central repository for documents related to PULSE-A hardware development.

Main components on the Fight Computer Motherboard - Ian Goldberg

LT8610W25N01GVZEIG_TRTJA1051T-3TMP36xSMAX14662MCP7940N-xSNLTM8062AIV-PBF

Fight Computer Motherboard - Ian Goldberg bill of materials (BOM)

31 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LT8610
~
U1
1
LT8610
~
U2
1
W25N01GVZEIG_TR
U3
1
TJA1051T-3
U4
1
TMP36xS
U5
1
MAX14662
U7
1
MCP7940N-xSN
U10
1
LTM8062AIV-PBF
~
U12
1
~
U13
1
~
U14
1
BC848ALT1G
2N7002
Q1
1
Battery_Cell
BT1
1
TestPoint
RTC_MFP1
2
TestPoint
TP5, TP6-32.768_kHz1
1
150060VS75000
3V3 Status
D1
1
150060VS75000
5V Status
D2
1
150060VS75000
Beaglebone Ready
D3
1
150060AS75000
CAN_PWR
D4
1
150060AS75000
TEMP_PWR
D5
1
4.7UF
0.1µF
C1
Show 10 more
QtyPartRefs
1
100K
2.2k
R1
1
18.2K
2.2k
R2
1
15
R3
1
243K
100
R4
1
110K
15
R5
1
412K
15
R6
1
18.2K
15
R7
1
243K
120
R9
1
150
10k
R12
1
10k
R13

Fight Computer Motherboard - Ian Goldberg design files

The KiCad project lives in the UChicago-Space-Program/pulse-hardware repository on GitHub; these links point at the commit this page was built from.

Fight Computer Motherboard - Ian Goldberg: common questions

What microcontroller does the Fight Computer Motherboard - Ian Goldberg use?

The Fight Computer Motherboard - Ian Goldberg is built around the QFN50P400X400X100-25N, from the TI MSP430/CC family.

How big is the Fight Computer Motherboard - Ian Goldberg PCB?

The Fight Computer Motherboard - Ian Goldberg measures 90.2 × 96 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Fight Computer Motherboard - Ian Goldberg?

31 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Fight Computer Motherboard - Ian Goldberg design files?

From the UChicago-Space-Program/pulse-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Fight Computer Motherboard - Ian Goldberg design in my own project?

The repository has no license, so all rights stay with UChicago-Space-Program. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Fight Computer Motherboard - Ian Goldberg without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.

More boards in pulse-hardware

Similar boards