HardLabs

UI Board

UCLA-Bruin-Supermileage·SMV_boards_2024-2025·UI_Board_Edwin/UI Board.kicad_pcb

UI Board layout, top view — open source RP2040/RP2350 board by UCLA-Bruin-Supermileage

About the UI Board

UI Board is an open source RP2040/RP2350 PCB design by UCLA-Bruin-Supermileage, published on GitHub. It is a 2-layer board measuring 170.5 × 95.8 mm, with 40 components from 15 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the CD4511BPWR. By type, the board carries 20 resistors, 10 switches, 3 ICs, 3 capacitors, 2 connectors and 1 diode.

Main components on the UI Board

CD4511BPWR

UI Board bill of materials (BOM)

40 components, 15 distinct parts.

QtyPartRefs
1
~
U1
1
CD4511BPWR
U2
1
~
U3
1
XT60-M
J1
1
22035035
J3
3
~
B1, B2, B3
1
~
RP1
6
~
S1, S2, S3, S4, S5, S6
1
A8L-11-12N1
SW1
1
WL-SMCW_0603
D1
2
C0805C104K5RACTU
0.1uF,50V
C1, C3
1
C0805C334K5RACTU
0.33uF,50V
C2
11
10kohms, 0.125W
R1, R2, R3, R4, R5, R6, R7, R8 +3
1
CRCW080544R2FKEA
R12
8
220ohm, 1/16W
R13, R14, R15, R16, R17, R18, R19, R20

UI Board design files

The KiCad project lives in the UCLA-Bruin-Supermileage/SMV_boards_2024-2025 repository on GitHub; these links point at the commit this page was built from.

UI Board: common questions

What microcontroller does the UI Board use?

The UI Board is built around the RP2040, from the RP2040/RP2350 family.

How big is the UI Board?

The UI Board measures 170.5 × 95.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the UI Board?

40 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the UI Board design files?

From the UCLA-Bruin-Supermileage/SMV_boards_2024-2025 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the UI Board design in my own project?

The repository has no license, so all rights stay with UCLA-Bruin-Supermileage. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the UI Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in SMV_boards_2024-2025

Similar boards