HardLabs

SMV H and S Board

UCLA-Bruin-Supermileage·SMV_boards_2024-2025·SMV Front and Center Board/SMV H and S Board.kicad_pcb

SMV H and S Board layout, top view — open source RP2040/RP2350 board by UCLA-Bruin-Supermileage

About the SMV H and S Board

SMV H and S Board is an open source RP2040/RP2350 PCB design by UCLA-Bruin-Supermileage, published on GitHub. It is a 2-layer board measuring 102.3 × 63 mm, with 45 components from 21 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the PADS131M04QPWRQ1, UA78M05QDCYRG4Q1 and MCP6286T-E/OT. By type, the board carries 17 resistors, 9 capacitors, 4 ICs, 4 diodes, 2 transistors and 1 connector.

Main components on the SMV H and S Board

PADS131M04QPWRQ1UA78M05QDCYRG4Q1MCP6286T-E/OT

SMV H and S Board bill of materials (BOM)

45 components, 21 distinct parts.

QtyPartRefs
1
PADS131M04QPWRQ1
U1
1
UA78M05QDCYRG4Q1
U2
2
MCP6286T-E/OT
U3, U4
2
PSMN1R8-40YLC_115
Q1, Q2
1
430450200
J1
4
22035035
Brake Pedal1, CAN1, CAN2, Gas Pedal1
2
430450200
Horn1, Power1
1
~
RP1
1
0430450401
Molex Micro-Fit 4 Pin
Wiper1
4
WL-SMCW_0603
D1, D2, D3, D4
4
1uF,16V
C1, C4, C9, C10
1
4.7nF,16V
C2
1
4.7F,16V
C3
1
C0805C334K5RACTU
0.47uF,50V
C5
1
C0805C104K5RACTU
0.1uF,50V
C7
1
220nF,50V
C8
2
49.9Ω, 0.125W
R1, R2
2
10K
R3, R4
4
150Ω
R6, R9, R12, R14
7
10kohms, 0.125W
R7, R8, R10, R11, R13, R17, R18
Show 1 more
QtyPartRefs
2
1kΩ
R15, R16

SMV H and S Board design files

The KiCad project lives in the UCLA-Bruin-Supermileage/SMV_boards_2024-2025 repository on GitHub; these links point at the commit this page was built from.

SMV H and S Board: common questions

What microcontroller does the SMV H and S Board use?

The SMV H and S Board is built around the RP2040, from the RP2040/RP2350 family.

How big is the SMV H and S Board?

The SMV H and S Board measures 102.3 × 63 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SMV H and S Board?

45 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the SMV H and S Board design files?

From the UCLA-Bruin-Supermileage/SMV_boards_2024-2025 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the SMV H and S Board design in my own project?

The repository has no license, so all rights stay with UCLA-Bruin-Supermileage. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SMV H and S Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in SMV_boards_2024-2025

Similar boards