PiBackpackBoard
UCLA-CUB·PiBackpackBoard
About the PiBackpackBoard PCB
PiBackpackBoard is an open source TI MSP430/CC PCB design by UCLA-CUB, published on GitHub. It is a 2-layer board measuring 53.2 × 35.6 mm, with 54 components from 31 distinct parts.
Its main chip is the MSP430G2433IPW28, from the TI MSP430/CC family. Other key parts include the LM358, AP2114H and P82B715. By type, the board carries 20 resistors, 11 capacitors, 8 connectors, 5 ICs, 5 transistors and 3 diodes.
From the project
Schematic and PCB for the RasPi backpack board.
Main components on the PiBackpackBoard
PiBackpackBoard bill of materials (BOM)
54 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MSP430G2433IPW28 | SSOP-28_5.3x10.2mm_Pitch0.65mm | U1 |
| 2 | LM358 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U2, U5 |
| 1 | AP2114H | SOT-223 | U3 |
| 1 | P82B715 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U4 |
| 3 | Q_NPN_BEC | SOT-23 | Q1, Q2, Q4 |
| 2 | Q_NMOS_SSSGD | SOT-669_LFPAK | Q3, Q5 |
| 1 | CONN_02X20 | Socket_Strip_Straight_2x20 | P1 |
| 1 | CONN_01X06 | Pin_Header_Straight_1x06 | P2 |
| 5 | CONN_01X03 | Pin_Header_Straight_1x03 | P3, P4, P6, P7, P8 |
| 1 | CONN_01X04 | Pin_Header_Straight_1x04 | P5 |
| 1 | SW_PUSH | SW_SPST_TL3315 | SW1 |
| 2 | RED LED | LED_0603 | D1, D2 |
| 1 | GREEN LED | LED_0603 | D3 |
| 1 | 100uH | R_0805 | L1 |
| 3 | 0.001uF | C_0402 | C1, C8, C10 |
| 3 | 0.1uF | C_0402 | C2, C9, C11 |
| 1 | 100uF | c_elec_3.5x5.6 | C3 |
| 2 | 4.7uF | C_0603 | C4, C5 |
| 1 | 0.22uF | C_0402 | C6 |
| 1 | 0.01uF | C_0402 | C7 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 47K | R_0402 | R1 |
| 2 | 100R | R_0402 | R2, R3 |
| 1 | 27K | R_0402 | R4 |
| 1 | 11K | R_0603 | R5 |
| 1 | 1.5K | R_0402 | R6 |
| 1 | 4.3K | R_0603 | R7 |
| 1 | 7.5K | R_0402 | R8 |
| 2 | 5.1K | R_0603 | R9, R10 |
| 2 | 15K | R_0402 | R11, R12 |
| 2 | 1K | R_0603 | R13, R15 |
| 6 | 2.2K | R_0603 | R14, R16, R17, R18, R19, R20 |
PiBackpackBoard design files
The KiCad project lives in the UCLA-CUB/PiBackpackBoard repository on GitHub; these links point at the commit this page was built from.
- LayoutPiBackpack.kicad_pcb
PiBackpackBoard: common questions
What microcontroller does the PiBackpackBoard use?
The PiBackpackBoard is built around the MSP430G2433IPW28, from the TI MSP430/CC family.
How big is the PiBackpackBoard PCB?
The PiBackpackBoard measures 53.2 × 35.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PiBackpackBoard?
54 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the PiBackpackBoard design files?
From the UCLA-CUB/PiBackpackBoard repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PiBackpackBoard design in my own project?
The repository has no license, so all rights stay with UCLA-CUB. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PiBackpackBoard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.
Similar boards
TI MSP430/CC
Pluto
carrotIndustries
24.4 × 24.4 mm36 parts2LGPL-3.0536TI MSP430/CC
Apimote
riverloopsec
83.3 × 33.4 mm80 parts4LTAPR-OHL-1.089TI MSP430/CC
Toniebox
toniebox-reverse-engineering
88 × 102 mm11 parts2LNo license36TI MSP430/CC
Nsumo hardware
artfulbytes
50 × 65 mm73 parts2LMIT33TI MSP430/CC
Elektronika-1
BenjaminSoelberg
29.5 × 29.5 mm14 parts4LGPL-3.029TI MSP430/CC
MSP430 Breadstick - Apple Sauce
upsidedownlabs
18.5 × 65.8 mm31 parts2LCERN-OHL-S-2.021