SparkFun NEO-M8U
UCLA-Rocket-Project·AresAvionics2021-2022·ARESnoseConeSystem2022/ARESnoseConeSystem2022/GPS/SparkFun NEO-M8U.kicad_pcb
About the SparkFun NEO-M8U PCB
SparkFun NEO-M8U is an open source PCB design by UCLA-Rocket-Project, published on GitHub under the MIT license. It is a board measuring 40.6 × 33 mm, with 91 components from 54 distinct parts.
Other key parts include the U-BLOX_MEO-M8U and 3.3V. By type, the board carries 49 ICs, 15 resistors, 8 jumpers, 7 connectors, 5 capacitors and 4 diodes.
Main components on the SparkFun NEO-M8U
SparkFun NEO-M8U bill of materials (BOM)
91 components, 54 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | U-BLOX_MEO-M8U | NEO-M9N_M8T_M8U | U1 |
| 1 | 3.3V | SOT23-5 | U2 |
| 2 | — | SDA-[) | U$1, U$4 |
| 1 | — | INT1 | U$2 |
| 2 | — | SCL-[) | U$3, U$5 |
| 4 | — | 3V3-04 | U$6, U$7, U$60, U$61 |
| 4 | — | GND-04 | U$8, U$9, U$62, U$63 |
| 1 | — | I_SUPER2_C-()-03 | U$10 |
| 1 | — | SPI1 | U$11 |
| 2 | — | PPS0 | U$12, U$52 |
| 2 | — | X1 | U$13, U$16 |
| 1 | — | QWIIC_4MM | U$14 |
| 2 | — | NEO#M8U0 | U$15, U$34 |
| 1 | — | PWR1 | U$17 |
| 1 | — | PWR-()-03 | U$18 |
| 2 | — | 5V | U$19, U$20 |
| 2 | — | Y2 | U$21, U$27 |
| 1 | — | U#BLOX3 | U$22 |
| 2 | — | CS#-_] | U$23, U$24 |
| 1 | — | ANT0 | U$25 |
Show 34 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | — | RX#MOSI3 | U$26, U$31 |
| 2 | — | Z0 | U$28, U$30 |
| 2 | — | TX#MISO1 | U$29, U$37 |
| 1 | — | INT0 | U$32 |
| 2 | — | #RST3 | U$35, U$36 |
| 2 | — | SCK-(]-04 | U$38, U$41 |
| 2 | — | #SAFE1 | U$39, U$40 |
| 2 | — | PPS5 | U$43, U$44 |
| 2 | CONN_041X04_NO_SILK | 1X04_NO_SILK | J1, J2 |
| 2 | Qwiic Right Angle | JST04_1MM_RA | J3, J4 |
| 1 | USB_C_2-LAYER_PADS | USB-C-16P-2LAYER-PADS | J5 |
| 1 | CONN_07NO_SILK | 1X07_NO_SILK | J6 |
| 1 | U.FL | U.FL | J7 |
| 1 | 6.8MM_COIN_CELL | ML414H_IV01E | BT1 |
| 1 | FRAME-LETTER | CREATIVE_COMMONS | FRAME1 |
| 1 | JUMPER-SMT_3_2-NC_TRACE_SILK | SMT-JUMPER_3_2-NC_TRACE_SILK | JP1 |
| 2 | JUMPER-SMT_2_NC_TRACE_SILK | SMT-JUMPER_2_NC_TRACE_SILK | JP2, JP3 |
| 1 | JUMPER-SMT_2_NO_SILK | SMT-JUMPER_2_NO_SILK | JP4 |
| 4 | STAND-OFF | STAND-OFF | JP9, JP10, JP11, JP12 |
| 1 | RED | LED-0603 | D1 |
| 1 | BLUE | LED-0603 | D2 |
| 1 | 0.5A/40V/420mV | SOD-323 | D3 |
| 1 | PRTR5V0U2F | SOT886 | D4 |
| 1 | 30Ω/1.8A | 0603 | FB1 |
| 3 | 1.0uF | 0603 | C1, C2, C4 |
| 1 | 47pF | 0603 | C3 |
| 1 | 0.1uF | 0603 | C5 |
| 2 | 27 | 0603 | R1, R2 |
| 1 | 100k | 0603 | R3 |
| 2 | 2.2k | 0603 | R4, R7 |
| 3 | 1k | 0603 | R5, R6, R14 |
| 4 | 33 | 0603 | R8, R9, R10, R11 |
| 2 | 5.1k | 0603 | R12, R13 |
| 1 | 10 | 0603 | R15 |
SparkFun NEO-M8U design files
The KiCad project lives in the UCLA-Rocket-Project/AresAvionics2021-2022 repository on GitHub; these links point at the commit this page was built from.
SparkFun NEO-M8U: common questions
How big is the SparkFun NEO-M8U PCB?
The SparkFun NEO-M8U measures 40.6 × 33 mm and is 1.6 mm thick.
How many components are on the SparkFun NEO-M8U?
91 components, from 54 distinct parts. The full bill of materials is listed on this page.
Where can I download the SparkFun NEO-M8U design files?
From the UCLA-Rocket-Project/AresAvionics2021-2022 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the SparkFun NEO-M8U design in my own project?
Yes, under the terms of its MIT license, which UCLA-Rocket-Project chose for the repository.