LoRa 1W Breakout
UCLA-Rocket-Project·AresAvionics2021-2022·ARESnoseConeSystem2022/ARESnoseConeSystem2022/LoRa_1W/LoRa_1W_Breakout.kicad_pcb
About the LoRa 1W Breakout
LoRa 1W Breakout is an open source PCB design by UCLA-Rocket-Project, published on GitHub under the MIT license. It is a board measuring 38.1 × 50.8 mm, with 50 components from 36 distinct parts.
Other key parts include the E19-915M30S and SPARKX-LOGO5. By type, the board carries 31 ICs, 5 resistors, 4 capacitors, 2 connectors and 1 diode.
It belongs with the rf & radio and dev boards & breakouts designs in this gallery.
Main components on the LoRa 1W Breakout
LoRa 1W Breakout bill of materials (BOM)
50 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | E19-915M30S | E19-915MS1W | U4 |
| 2 | — | LORA0 | U$1, U$67 |
| 2 | — | SPX12760 | U$2, U$69 |
| 2 | — | 1W1 | U$3, U$27 |
| 1 | — | PWR0 | U$4 |
| 2 | SPARKX-LOGO5 | SPARKX-LARGE | U$5, U$6 |
| 2 | — | 915MHZ0 | U$7, U$8 |
| 1 | — | #LED#0 | U$15 |
| 1 | — | #5V#1 | U$43 |
| 1 | — | #3V3#0 | U$44 |
| 1 | — | #SDO#3 | U$45 |
| 1 | — | #SDI#4 | U$46 |
| 1 | — | ##CS##5 | U$47 |
| 1 | — | #TXEN#6 | U$48 |
| 1 | — | #RXEN#7 | U$49 |
| 3 | — | #GND#8 | U$52, U$53, U$61 |
| 1 | — | #D5#6 | U$54 |
| 1 | — | #D4#5 | U$55 |
| 1 | — | #D3#4 | U$56 |
| 1 | — | #D2#3 | U$57 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | — | #D1#2 | U$58 |
| 1 | — | #D0#1 | U$59 |
| 1 | — | ##RST##0 | U$60 |
| 1 | — | #SCK#2 | U$62 |
| 2 | CONN_09NO_SILK | 1X09_NO_SILK | J1, J2 |
| 1 | RP-SMA | SMA-EDGE | E1 |
| 1 | FRAME-LETTER | CREATIVE_COMMONS | FRAME2 |
| 4 | STAND-OFF | STAND-OFF | H1, H2, H3, H4 |
| 1 | JUMPER-SMT_2_NC_TRACE_SILK | SMT-JUMPER_2_NC_TRACE_SILK | VIN_LED1 |
| 1 | Yellow | LED-0603 | D7 |
| 1 | 1.0uF | 0603 | C5 |
| 1 | 0.1uF | 0603 | C6 |
| 1 | 0.22uF | 0603 | C7 |
| 1 | 47uF | EIA3528 | C8 |
| 1 | 1k | 0603 | R1 |
| 4 | 100k | 0603 | R16, R17, R18, R19 |
LoRa 1W Breakout design files
The KiCad project lives in the UCLA-Rocket-Project/AresAvionics2021-2022 repository on GitHub; these links point at the commit this page was built from.
LoRa 1W Breakout: common questions
How big is the LoRa 1W Breakout?
The LoRa 1W Breakout measures 38.1 × 50.8 mm and is 1.6 mm thick.
How many components are on the LoRa 1W Breakout?
50 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the LoRa 1W Breakout design files?
From the UCLA-Rocket-Project/AresAvionics2021-2022 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the LoRa 1W Breakout design in my own project?
Yes, under the terms of its MIT license, which UCLA-Rocket-Project chose for the repository.
More boards in AresAvionics2021-2022
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979