ARESnoseConeSystem2022
UCLA-Rocket-Project·AresAvionics2021-2022·ARESnoseConeSystem2022/ARESnoseConeSystem2022/ARESnoseConeSystem2022.kicad_pcb
About the ARESnoseConeSystem2022 PCB
ARESnoseConeSystem2022 is an open source NXP PCB design by UCLA-Rocket-Project, published on GitHub under the MIT license. It is a 2-layer board measuring 125.2 × 66 mm, with 18 components from 16 distinct parts.
Its main chip is the Teensy4.1, from the NXP family. Other key parts include the BA05CC0WFP-E2. By type, the board carries 8 connectors, 4 capacitors, 2 ICs, 1 jumper and 1 resistor.
Main components on the ARESnoseConeSystem2022
ARESnoseConeSystem2022 bill of materials (BOM)
18 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BA05CC0WFP-E2 | TO-252-5_TabPin3 | U1 |
| 1 | Teensy4.1 | Teensy41 | U2 |
| 2 | 436500200 | Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J1, J2 |
| 1 | BMP390_Headers | PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | ICM20948_Headers | PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | GPS_Headers1 | PinHeader_1x07_P2.54mm_Vertical | J5 |
| 1 | Transmitter_Headers1 | PinHeader_1x09_P2.54mm_Vertical | J6 |
| 1 | Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J7 |
| 1 | Transmitter_Headers2 | PinHeader_1x09_P2.54mm_Vertical | J8 |
| 1 | PinHeader_1x01_P2.54mm_Vertical | PinHeader_1x01_P2.54mm_Vertical | +5V |
| 1 | STAND-OFF | STAND-OFF | H4 |
| 1 | STAND-OFF | STAND-OFF | JP9 |
| 2 | 10 uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2 |
| 1 | 2.2 uF | C_0805_2012Metric | C3 |
| 1 | 10 uF | C_0805_2012Metric | C4 |
| 1 | 10 kOhm | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
ARESnoseConeSystem2022 design files
The KiCad project lives in the UCLA-Rocket-Project/AresAvionics2021-2022 repository on GitHub; these links point at the commit this page was built from.
ARESnoseConeSystem2022: common questions
What microcontroller does the ARESnoseConeSystem2022 use?
The ARESnoseConeSystem2022 is built around the Teensy4.1, from the NXP family.
How big is the ARESnoseConeSystem2022 PCB?
The ARESnoseConeSystem2022 measures 125.2 × 66 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ARESnoseConeSystem2022?
18 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the ARESnoseConeSystem2022 design files?
From the UCLA-Rocket-Project/AresAvionics2021-2022 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the ARESnoseConeSystem2022 design in my own project?
Yes, under the terms of its MIT license, which UCLA-Rocket-Project chose for the repository.
Can I test firmware for the ARESnoseConeSystem2022 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in AresAvionics2021-2022
Similar boards
NXP
32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763NXP
Mega-Cube-Board
MaltWhiskey
200 × 54 mm100 parts4LNo license763NXP
MCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532NXP
MCL68
MicroCoreLabs
31.6 × 84.1 mm13 parts4LNo license532NXP
MCL65+
MicroCoreLabs
72.6 × 64.1 mm6 parts2LNo license532NXP
MCLZ8
MicroCoreLabs
37.1 × 61.5 mm6 parts4LNo license532