SparkFun IMU Breakout ICM-20948
UCLA-Rocket-Project·AresAvionics2021-2022·ARESnoseConeSystem2022/ARESnoseConeSystem2022/ICM20948/SparkFun_IMU_Breakout_ICM-20948.kicad_pcb
About the SparkFun IMU Breakout ICM-20948
SparkFun IMU Breakout ICM-20948 is an open source PCB design by UCLA-Rocket-Project, published on GitHub under the MIT license. It is a board measuring 25.4 × 25.4 mm, with 97 components from 47 distinct parts.
Other key parts include the 9DoF IMU and 1.8V/100mA. By type, the board carries 53 ICs, 17 resistors, 8 transistors, 4 connectors, 4 jumpers and 4 capacitors.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
Main components on the SparkFun IMU Breakout ICM-20948
SparkFun IMU Breakout ICM-20948 bill of materials (BOM)
97 components, 47 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 9DoF IMU | QFN24-3X3 | U2 |
| 1 | 1.8V/100mA | SC70 | U3 |
| 4 | — | GND4 | U$1, U$2, U$22, U$24 |
| 1 | — | PWR0 | U$3 |
| 2 | — | INT3 | U$4, U$21 |
| 2 | — | FSNC2 | U$5, U$20 |
| 2 | — | ACL1 | U$6, U$19 |
| 2 | — | ADA0 | U$7, U$18 |
| 1 | — | MISO13 | U$8 |
| 1 | — | MOSI14 | U$9 |
| 1 | — | SCLK15 | U$10 |
| 1 | — | #CS16 | U$11 |
| 1 | — | 1V8#5V57 | U$12 |
| 3 | — | VIN5 | U$13, U$30, U$44 |
| 1 | — | NC17 | U$14 |
| 1 | — | CL4 | U$15 |
| 1 | — | DA2 | U$16 |
| 1 | — | AD012 | U$17 |
| 1 | — | ADR2 | U$23 |
| 1 | — | I2C_PU21 | U$25 |
Show 27 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | — | SPI19 | U$26 |
| 1 | — | AUX_PU24 | U$27 |
| 1 | — | LED23 | U$29 |
| 1 | — | ICM#2094820 | U$31 |
| 4 | — | X0 | U$34, U$40, U$50, U$57 |
| 4 | — | Y1 | U$35, U$41, U$51, U$58 |
| 4 | — | Z2 | U$36, U$42, U$52, U$59 |
| 2 | — | G5 | U$37, U$60 |
| 2 | — | A4 | U$38, U$61 |
| 2 | — | M3 | U$39, U$49 |
| 1 | — | QWIIC_9DOF_IMU_0 | U$43 |
| 1 | — | I#C1 | U$45 |
| 8 | 20V/0.2A/8MHz/1.2Ω/1Vth | SOT-416FL | Q2, Q4, Q6, Q8, Q10, Q12, Q14, Q16 |
| 2 | QWIIC_CONNECTORJS-1MM | JST04_1MM_RA | J1, J2 |
| 2 | CONN_06NO_SILK_NO_POP | 1X06_NO_SILK | J3, J4 |
| 1 | FRAME-LEDGER | CREATIVE_COMMONS | FRAME2 |
| 4 | STAND-OFF | STAND-OFF | H1, H2, H3, H4 |
| 1 | ADR | SMT-JUMPER_2_NO_SILK | JP2 |
| 1 | AUX | SMT-JUMPER_3_2-NC_TRACE_SILK | JP3 |
| 1 | I2C PU | SMT-JUMPER_3_2-NC_TRACE_SILK | JP4 |
| 1 | LED | SMT-JUMPER_2_NC_TRACE_SILK | JP5 |
| 1 | 1.8V | PAD.03X.03 | TP1 |
| 1 | RED | LED-0603 | D1 |
| 2 | 1.0uF | 0603 | C1, C4 |
| 2 | 0.1uF | 0603 | C2, C3 |
| 1 | 220 | 0603 | R9 |
| 16 | 2.2k | 0402-TIGHT | R10, R11, R12, R13, R14, R15, R16, R17 +8 |
SparkFun IMU Breakout ICM-20948 design files
The KiCad project lives in the UCLA-Rocket-Project/AresAvionics2021-2022 repository on GitHub; these links point at the commit this page was built from.
SparkFun IMU Breakout ICM-20948: common questions
How big is the SparkFun IMU Breakout ICM-20948?
The SparkFun IMU Breakout ICM-20948 measures 25.4 × 25.4 mm and is 1.6 mm thick.
How many components are on the SparkFun IMU Breakout ICM-20948?
97 components, from 47 distinct parts. The full bill of materials is listed on this page.
Where can I download the SparkFun IMU Breakout ICM-20948 design files?
From the UCLA-Rocket-Project/AresAvionics2021-2022 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the SparkFun IMU Breakout ICM-20948 design in my own project?
Yes, under the terms of its MIT license, which UCLA-Rocket-Project chose for the repository.
More boards in AresAvionics2021-2022
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k