Trk

uge·trk·kicad/trk-nrf/trk-nrf.kicad_pcb

Trk PCB layout, top view — open source Nordic nRF board by uge

About the Trk PCB

Trk is an open source Nordic nRF PCB design by uge, published on GitHub under the CC-BY-NC-4.0 license. It is a 4-layer board measuring 23.2 × 22 mm, with 44 components from 24 distinct parts.

Its main chip is the nRF9151-LAXX, from the Nordic nRF family. Other key parts include the CDCE6214RGER and TPS631010YBGR. By type, the board carries 16 resistors, 13 capacitors, 4 ICs, 4 test points, 3 inductors and 2 connectors.

It belongs with the power & battery designs in this gallery.

From the project

This repo contains a KiCad 8.0 project which hopes to implement a low power tracker for pico-balloons based on the nRF9151 module and a WSPR protocol modulator.

This repo contains a KiCad 8.0 project which hopes to implement a low power tracker for pico-balloons based on the nRF9151 module and a WSPR protocol modulator.

The nRF9151 is marketed with emphasis on cellular data and GPS capabilities with optimization for power. Trackers are one category of intended applications and the device and software stack have provisions for aggressive power saving modes. Even if the cellular data connectivity feature is not used, the nrf9151 is a power efficient microcontroller with an embedded GPS.

Main components on the Trk

Trk bill of materials (BOM)

44 components, 24 distinct parts.

QtyPartRefs
1
nRF9151-LAXX
U1
1
CDCE6214RGER
U2
2
TPS631010YBGR
U3, U4
1
TG2520SMN-xx.xxxxxxMhz-xxxxNM
X1
1
Conn_02x05_Odd_Even
J1
1
Conn_01x20_Pin
J2
1
WSPR_ANT_N
TP3
1
WSPR _ANT_P
TP4
1
GND
TP5
1
VBUS
TP6
1
LED
D1
2
1.0uH
L1, L2
1
L_Ferrite
L3
2
47 uF
C1, C4
4
10 uF
C2, C3, C5, C9
1
.022 uF
C6
5
.1uF
C7, C8, C10, C11, C12
1
39pF
C14
1
240K
R1
10
91K
R2, R4, R5, R6, R9, R12, R13, R14 +2
Show 4 more
QtyPartRefs
1
511K
R3
2
NS
R7, R8
1
300
R10
1
0
R11

Trk design files

The KiCad project lives in the uge/trk repository on GitHub; these links point at the commit this page was built from.

Trk: common questions

What microcontroller does the Trk use?

The Trk is built around the nRF9151-LAXX, from the Nordic nRF family.

How big is the Trk PCB?

The Trk measures 23.2 × 22 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Trk?

44 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the Trk design files?

From the uge/trk repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Trk design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Trk without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

Similar boards