HardLabs

Nanoupdi

umbertoragone·nanoupdi·kicad/NanoUPDI_v2.kicad_pcb

Nanoupdi PCB layout, top view — open source board by umbertoragone
Simulate this board

About the Nanoupdi PCB

Nanoupdi is an open source PCB design by umbertoragone, published on GitHub under the MIT license. It is a 2-layer board measuring 10 × 22 mm, with 20 components from 15 distinct parts.

Other key parts include the CH340E. By type, the board carries 6 resistors, 5 capacitors, 3 diodes, 1 IC, 1 connector and 1 switch.

It belongs with the usb & debug tools designs in this gallery.

From the project

NanoUPDI: The smallest USB Type-C serial UPDI programmer for your projects

Make sure to specify the correct serial device: on Linux devices, NanoUPDI might show up as /dev/ttyUSBX, while on MacOS it might show as /dev/tty.usbserial-XX.

Main components on the Nanoupdi

CH340E

Nanoupdi bill of materials (BOM)

20 components, 15 distinct parts.

QtyPartRefs
1
CH340E
U1
1
Conn_01x03
J1
1
MSK12C02
SW1
1
USB_C_Receptacle_USB2.0
USB1
1
AP2112K-3.3
VREG1
1
1N4148
D1
1
GREEN
D2
1
RED
D3
1
220R @ 100MHz
FB1
3
100n
C1, C4, C5
2
10u
C2, C3
2
5k1
R1, R2
2
470R
R3, R6
1
0R
R4
1
1k
R5

Nanoupdi design files

The KiCad project lives in the umbertoragone/nanoupdi repository on GitHub; these links point at the commit this page was built from.

Nanoupdi: common questions

How big is the Nanoupdi PCB?

The Nanoupdi measures 10 × 22 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Nanoupdi?

20 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the Nanoupdi design files?

From the umbertoragone/nanoupdi repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Nanoupdi design in my own project?

Yes, under the terms of its MIT license, which umbertoragone chose for the repository.

Similar boards