Gregory-Pad
UnfadingSoul97·Gregory-Pad·PCB/Gregory.kicad_pcb
About the Gregory-Pad PCB
Gregory-Pad is an open source PCB design by UnfadingSoul97, published on GitHub. It is a 2-layer board measuring 109.8 × 110.8 mm, with 38 components from 6 distinct parts.
Other key parts include the MOUDLE-SEEEDUINO-XIAO and ER_OLEDM0.91_1x-I2C. By type, the board carries 18 diodes, 17 switches, 2 ICs and 1 connector.
It belongs with the displays & leds and keyboards designs in this gallery.
From the project
The Great Gregory Pad the Balance of Elegance and beauty
It Has a top cover/Bezel,Switch plate which stays on top of the middle layer so we can sandwich it between the middle body. The Bottom part is sepaerate so easy access to bottom and led.
Yes I indeed added the steps twice but this one has images so and less details.
16x Gateron KS-3X1 Milky Yellow Pro (https://stackskb.com/store/gateron-ks-3x1p-pro-yellows/)
1x SSD1327 128x128 Oled display (5V VCC, 3.3V logic, I2C)(https://www.waveshare.com/1.5inch-oled-module.htm)
Main components on the Gregory-Pad
Gregory-Pad bill of materials (BOM)
38 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MOUDLE-SEEEDUINO-XIAO | XIAO-Generic-Hybrid-14P-2.54-21X17.8MM | U1 |
| 1 | ER_OLEDM0.91_1x-I2C | PinHeader_1x04_P2.54mm_Vertical | U2 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 16 | SW_Push | MX-Hotswap-1U | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +8 |
| 1 | RotaryEncoder | RotaryEncoder_Alps_EC11E_Vertical_H20mm | SW17 |
| 18 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +10 |
Gregory-Pad design files
The KiCad project lives in the UnfadingSoul97/Gregory-Pad repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Gregory.kicad_pcb
- SchematicPCB/Gregory.kicad_sch
Gregory-Pad: common questions
How big is the Gregory-Pad PCB?
The Gregory-Pad measures 109.8 × 110.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Gregory-Pad?
38 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Gregory-Pad design files?
From the UnfadingSoul97/Gregory-Pad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Gregory-Pad design in my own project?
The repository has no license, so all rights stay with UnfadingSoul97. Use it as a reference, and ask the author before reusing the design.
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kAnyon e motherboard
byrantech
133 × 92 mm258 parts6LMIT4.3kSwitch
byrantech
18.5 × 11.1 mm5 parts2LMIT4.3k