Battery leds

unicab369·ESP-MESS·5hardware/battery_leds/battery_leds.kicad_pcb

Battery leds PCB layout, top view — open source RISC-V board by unicab369

About the Battery leds PCB

Battery leds is an open source RISC-V PCB design by unicab369, published on GitHub. It is a 2-layer board measuring 32 × 32 mm, with 31 components from 7 distinct parts.

Its main chip is the QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm, from the RISC-V family. By type, the board carries 18 diodes, 7 resistors, 2 transistors, 1 IC, 1 connector and 1 battery holder.

It belongs with the power & battery, iot & wireless and sensors designs in this gallery.

From the project

I am building a Wireless Bridge System that can manage multiple devices using a variety of wireless technologies. The system is designed to be flexible and scalable, allowing it to adapt to different wireless application requirements. My goal is to explore and discover different

I am building a Wireless Bridge System that can manage multiple devices using a variety of wireless technologies. The system is designed to be flexible and scalable, allowing it to adapt to different wireless application requirements. My goal is to explore and discover different IoT applications while keeping the cost minimal. To achieve this, I created ESP-MESS.

Battery leds, from the project README
From the project README

Battery leds bill of materials (BOM)

31 components, 7 distinct parts.

QtyPartRefs
1
~
U1
2
AO3400A
Q1, Q2
1
Conn_01x03_Pin
J1
1
BAT-HLD-001-TR
BT2
1
SW_Push
SW2
18
LED
D1, D2, D3, D4, D5, D6, D7, D10 +10
7
R
R1, R2, R3, R4, R5, R6, R15

Battery leds design files

The KiCad project lives in the unicab369/ESP-MESS repository on GitHub; these links point at the commit this page was built from.

Battery leds: common questions

What microcontroller does the Battery leds use?

The Battery leds is built around the QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm, from the RISC-V family.

How big is the Battery leds PCB?

The Battery leds measures 32 × 32 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Battery leds?

31 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Battery leds design files?

From the unicab369/ESP-MESS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Battery leds design in my own project?

The repository has no license, so all rights stay with unicab369. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Battery leds without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.

More boards in ESP-MESS

Similar boards