Sensor node
unicab369·ESP-MESS·5hardware/sensor_node_v4/sensor_node.kicad_pcb
About the Sensor node PCB
Sensor node is an open source RISC-V PCB design by unicab369, published on GitHub. It is a 2-layer board measuring 43.8 × 48.8 mm, with 17 components from 16 distinct parts.
Its main chip is the CH32V003F4P6, from the RISC-V family. Other key parts include the MCP1700x-330xxTO, APDS-9960, DS3231M, DS1307+ and DS1302+. By type, the board carries 8 ICs, 3 switches, 2 connectors, 1 crystal, 1 buzzer and 1 capacitor.
It belongs with the sensors, iot & wireless and power & battery designs in this gallery.
From the project
I am building a Wireless Bridge System that can manage multiple devices using a variety of wireless technologies. The system is designed to be flexible and scalable, allowing it to adapt to different wireless application requirements. My goal is to explore and discover different
I am building a Wireless Bridge System that can manage multiple devices using a variety of wireless technologies. The system is designed to be flexible and scalable, allowing it to adapt to different wireless application requirements. My goal is to explore and discover different IoT applications while keeping the cost minimal. To achieve this, I created ESP-MESS.

Main components on the Sensor node
Sensor node bill of materials (BOM)
17 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | ESP12Base | U9 |
| 1 | CH32V003F4P6 | TSSOP-20_4.4x6.5mm_P0.65mm | U10 |
| 1 | MCP1700x-330xxTO | TO-92_Inline | U11 |
| 1 | APDS-9960 | Avago_APDS-9960 | U12 |
| 1 | DS3231M | SOIC-16W_7.5x10.3mm_P1.27mm | U14 |
| 1 | DS1307+ | DIP-8_W7.62mm | U15 |
| 1 | DS1302+ | DIP-8_W7.62mm | U16 |
| 1 | VL53L1CXV0FY1 | ST_VL53L1x | U17 |
| 1 | Crystal | Crystal_SMD_0603-2Pin_6.0x3.5mm | Y1 |
| 2 | Conn_02x20_Counter_Clockwise | PinSocket_2x20_P2.54mm_Vertical | J4, J5 |
| 1 | Buzzer | BuzzerSmall | BZ2 |
| 1 | SW_DIP_x04 | SW_DIP_SPSTx04_Slide_6.7x11.72mm_W8.61mm_P2.54mm_LowProfile | SW7 |
| 1 | SW_Push | SW_PUSH-12mm | SW8 |
| 1 | RotaryEncoder | RotaryEncoder_Alps_EC11E_Vertical_H20mm | SW9 |
| 1 | C | CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | R | R_2512_6332Metric | R1 |
Sensor node design files
The KiCad project lives in the unicab369/ESP-MESS repository on GitHub; these links point at the commit this page was built from.
Sensor node: common questions
What microcontroller does the Sensor node use?
The Sensor node is built around the CH32V003F4P6, from the RISC-V family.
How big is the Sensor node PCB?
The Sensor node measures 43.8 × 48.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sensor node?
17 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sensor node design files?
From the unicab369/ESP-MESS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sensor node design in my own project?
The repository has no license, so all rights stay with unicab369. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sensor node without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
More boards in ESP-MESS
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105