IoT-DeviceLiability for-Marine-Cargo-Damage-Insurance

Unoruru·IoT-DeviceLiability-for-Marine-Cargo-Damage-Insurance·Design/Position and Motion Monitor.kicad_pcb

IoT-DeviceLiability for-Marine-Cargo-Damage-Insurance PCB layout, top view — open source ESP32 board by Unoruru

About the IoT-DeviceLiability for-Marine-Cargo-Damage-Insurance PCB

IoT-DeviceLiability for-Marine-Cargo-Damage-Insurance is an open source ESP32 PCB design by Unoruru, published on GitHub. It is a 4-layer board measuring 55.4 × 41.3 mm, with 12 components from 12 distinct parts.

Its main chip is the ESP32-C3-WROOM-02-N4, from the ESP32 family.

It belongs with the iot & wireless and sensors designs in this gallery.

From the project

Hardware design files for an IoT position and motion monitoring tag intended to support marine cargo damage insurance investigations.

Hardware design files for an IoT position and motion monitoring tag intended to support marine cargo damage insurance investigations.

The device is designed to travel with cargo and record orientation, motion, tilt, and shock-related events across logistics stages such as warehouse handling, port transfer, vessel transport, and final delivery. The hardware platform combines an STM32 microcontroller, an inertial measurement unit, wireless connectivity, USB-C power/data access, and visual status indicators.

IoT-DeviceLiability for-Marine-Cargo-Damage-Insurance bill of materials (BOM)

12 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
USB4105-GF-A
USB_C_Receptacle_USB2.0_16P
GCT
[1]J1
1
USBLC6-2SC6Y
USBLC6-2SC6
STMICROELECTRONICS
[1]U1
1
MIC5365-3.3YD5-TR
MIC5365-3.3YD5
Microchip Technology
[1]U4
1
TC2030-MCP-NL
Conn_ARM_SWD_TagConnect_TC2030
Tag-Connect LLC
[2]J2
1
STM32WB55CEU6
STM32WB55CEUx
STMicroelectronics
[2]U2
1
NX2012SA-32.768K-STD-MUB-1
32kHz768
NDK
[2]X1
1
NX2016SA-32M-EXS00A-CS06465
32MHz
NDK
[2]X2
1
LSM6DSO32TR
LSM6DS3
STMicroelectronics
[3]U3
1
ESP32-C3-WROOM-02-N4
ESP32-C3-WROOM-02
Espressif Systems
[5]U2
1
0530480410
Conn_01x04
Molex
[6]J1
1
Molex_PicoBlade_53048-0210_1x02_P1.25mm_Horizontal
[PWR]J1
1
VLMRGB6122-B00-08
LED_RGB
RS
[4]D1

IoT-DeviceLiability for-Marine-Cargo-Damage-Insurance design files

The KiCad project lives in the Unoruru/IoT-DeviceLiability-for-Marine-Cargo-Damage-Insurance repository on GitHub; these links point at the commit this page was built from.

IoT-DeviceLiability for-Marine-Cargo-Damage-Insurance: common questions

What microcontroller does the IoT-DeviceLiability for-Marine-Cargo-Damage-Insurance use?

The IoT-DeviceLiability for-Marine-Cargo-Damage-Insurance is built around the ESP32-C3-WROOM-02-N4, from the ESP32 family.

How big is the IoT-DeviceLiability for-Marine-Cargo-Damage-Insurance PCB?

The IoT-DeviceLiability for-Marine-Cargo-Damage-Insurance measures 55.4 × 41.3 mm, has 4 copper layers and is 1.560378 mm thick.

How many components are on the IoT-DeviceLiability for-Marine-Cargo-Damage-Insurance?

12 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the IoT-DeviceLiability for-Marine-Cargo-Damage-Insurance design files?

From the Unoruru/IoT-DeviceLiability-for-Marine-Cargo-Damage-Insurance repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the IoT-DeviceLiability for-Marine-Cargo-Damage-Insurance design in my own project?

The repository has no license, so all rights stay with Unoruru. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the IoT-DeviceLiability for-Marine-Cargo-Damage-Insurance without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards