Kaino

UnstoppableBlob·kaino·kaino-kicad/kaino-kicad.kicad_pcb

Kaino PCB layout, top view — open source RP2040/RP2350 board by UnstoppableBlob

About the Kaino PCB

Kaino is an open source RP2040/RP2350 PCB design by UnstoppableBlob, published on GitHub. It is a 2-layer board measuring 311.8 × 225 mm, with 53 components from 4 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 26 switches, 25 diodes, 1 module and 1 connector.

It belongs with the keyboards designs in this gallery.

From the project

Here's a short story about this project! I wanted a keyboard from Casio, but it was too expensive for me, so I made my own. I just made a keyboard which should theoretically be able to connect to my computer, and use LMMS that's on my computer, to play sounds that sound exactly l

Here's a short story about this project! I wanted a keyboard from Casio, but it was too expensive for me, so I made my own. I just made a keyboard which should theoretically be able to connect to my computer, and use LMMS that's on my computer, to play sounds that sound exactly like a real piano!

I made the schematic and PCB in Kicad, which is my prefered software for this type of stuff. I used Shapr3D on my Ipad for the model of the case. I also used Shapr3D's "Visualize" feature for the renders that I got. I plan to use Cherry MX mechanical keyswitches, which are what I have on my pcb…

Kaino, from the project README
From the project README

Main components on the Kaino

Kaino bill of materials (BOM)

53 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A1
1
Conn_01x08
J1
26
SW_Push_45deg
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +18
25
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +17

Kaino design files

The KiCad project lives in the UnstoppableBlob/kaino repository on GitHub; these links point at the commit this page was built from.

Kaino: common questions

What microcontroller does the Kaino use?

The Kaino is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Kaino PCB?

The Kaino measures 311.8 × 225 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Kaino?

53 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Kaino design files?

From the UnstoppableBlob/kaino repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Kaino design in my own project?

The repository has no license, so all rights stay with UnstoppableBlob. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Kaino without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards