Arm controller single v1.1
About the Arm controller single v1.1 PCB
Arm controller single v1.1 is an open source PCB design by UofA-SPEAR, published on GitHub. It is a 2-layer board measuring 100 × 50 mm, with 51 components from 26 distinct parts.
Other key parts include the NC7SZ157P6X, DRV8701PRGER, TS5A3357DCUT, 4MB Flash and MOSFET-NCHDFN8-5X6. By type, the board carries 18 capacitors, 10 ICs, 10 resistors, 6 jumpers, 3 connectors and 1 LED.
From the project
A place for SPEAR PCBs
Central repository to hold PCB designs for SPEAR.
All board documentation shall be held in the Wiki..
If you plan on contributing to the PCB designs, first, you need to go through this list:
1. Sign up for github, and fill out the new member form (contact the current team lead for this). 2. Follow the GitHub Guides, specifically: - "Hello World" - "Understanding the GitHub flow." - "Documenting your projects on GitHub" 3. Follow the Onboarding Task.
Main components on the Arm controller single v1.1
Arm controller single v1.1 bill of materials (BOM)
51 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NC7SZ157P6X | SOT65P210X110-6N | IC1 |
| 1 | DRV8701PRGER | QFN50P400X400X100-25N | IC2 |
| 1 | TS5A3357DCUT | SOP50P310X90-8N | IC3 |
| 1 | 4MB Flash | SO08 | U1 |
| 5 | MOSFET-NCHDFN8-5X6 | ALOM_DFN5X6_8L_EP1_P | U$1, U$2, U$3, U$4, U$6 |
| 1 | SMS-004 | SMS-004 | U$5 |
| 2 | 1017503 | 1017503 | J1, J2 |
| 1 | 5-103669-4 | TE_5-103669-4 | J3 |
| 1 | 0R-JUMPB | B0R-JMP | JMP1 |
| 2 | — | 1X04 | JP1, JP2 |
| 2 | — | 1X20 | JP3, JP4 |
| 2 | — | 1X02 | JP5, JP6 |
| 1 | PLM74700QDBVTQ1 | SOT95P280X145-6N | PS1 |
| 1 | — | CHIP-LED0805 | LED1 |
| 1 | CGRM4001-G | SOD-123_MINI-SMA | D1 |
| 3 | 1uF | C0603 | C1, C2, C3 |
| 10 | 100nF | C0603 | C4, C7, C8, C10, C11, C12, C13, C14 +2 |
| 3 | 680uF | E5-10,5 | C5, C6, C18 |
| 1 | 1000pF | C0603 | C9 |
| 1 | 10uF | C1206 | C15 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 10k | R0603 | R1, R2, R6, R9 |
| 2 | 0.01 | R2512 | R3, R7 |
| 1 | 33k | R0603 | R4 |
| 1 | 7.5k | R0603 | R5 |
| 1 | 1k | R0603 | R8 |
| 1 | 120 | R0603 | R10 |
Arm controller single v1.1 design files
The KiCad project lives in the UofA-SPEAR/pcb_designs repository on GitHub; these links point at the commit this page was built from.
Arm controller single v1.1: common questions
How big is the Arm controller single v1.1 PCB?
The Arm controller single v1.1 measures 100 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Arm controller single v1.1?
51 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Arm controller single v1.1 design files?
From the UofA-SPEAR/pcb_designs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Arm controller single v1.1 design in my own project?
The repository has no license, so all rights stay with UofA-SPEAR. Use it as a reference, and ask the author before reusing the design.
More boards in pcb_designs
Comp PDU
100 × 70 mm50 parts2LNo license3
STM32Green Pill stlink
55 × 23 mm42 parts2LNo license3
Sub sys pdu
100 × 110 mm38 parts2LNo license3
Buck module 5v
25 × 25 mm28 parts2LNo license3
STM32Speedy barebone
51.2 × 23 mm23 parts2LNo license3
IMU
21.3 × 53.7 mm17 parts2LNo license3
Speedy Breakout Board
100 × 50 mm9 parts2LNo license3
Communication hub
51.7 × 30.5 mm7 parts2LNo license3
As5600 adapter
16 × 16 mm6 parts2LNo license3
Canbus basic
20 × 4 mm5 parts2LNo license3
Earlier revisions in the repo: arm controller single