6 open source boards using the NC7SZ157P6X
Real designs built with the NC7SZ157P6X, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
FreeDSP-aurora
freeDSP
110 × 110 mm502 parts2LCC-BY-SA-4.0222AVR/Arduino
I2S-Hat
raptorlightning
65 × 56 mm94 parts4LGPL-3.019Arm controller single v1.1
UofA-SPEAR
100 × 50 mm51 parts2LNo license3ESP32
FreeDSP-aurora
mischuja
110 × 110 mm502 parts2LGPL-3.01AVR/Arduino
AAquad
Fberbari
69.2 × 47.6 mm37 parts2LGPL-3.00ESP32
Adau1492
fabguitar69690
113 × 77 mm171 parts2LNo license0
How designs wire the NC7SZ157P6X
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the NC7SZ157P6X connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF.
- The I0 pin has a series resistor on 4 of 6 designs, most often 33 Ω.
- The Z pin has a series resistor on 4 of 6 designs, most often 33 Ω.
- The I0 pin has a crystal on 3 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 2 | Connected to: GND 100% | — |
| I0pin 3 | Connected to: AK4458VN 33%, AK5558VN 33% |
|
| Zpin 4 | Connected to: Signal 100% |
|
| VCCpin 5 | Connected to: VDD 83% · a signal 17% |
|
| Spin 6 | Connected to: XE216-512-TQ128-C20 50% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FreeDSP-aurora by freeDSP, I2S-Hat by raptorlightning, Arm controller single v1.1 by UofA-SPEAR and FreeDSP-aurora by mischuja.
The NC7SZ157P6X in open source designs
The gallery holds 6 open source boards using the NC7SZ157P6X from 6 GitHub repositories; a typical one measures about 105 × 66.5 mm and carries around 133 components.
83% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is FreeDSP-aurora by freeDSP.
Parts used alongside the NC7SZ157P6X
Microcontrollers on boards using the NC7SZ157P6X
What boards using the NC7SZ157P6X are built for
NC7SZ157P6X: common questions
Where can I find a NC7SZ157P6X reference design?
Each of the 6 boards on this page is a real design using the NC7SZ157P6X. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the NC7SZ157P6X VCC pin?
The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the NC7SZ157P6X.
What resistor goes on the NC7SZ157P6X I0 pin?
The I0 pin has a series resistor on 4 of 6 designs, most often 33 Ω. Counted from the KiCad layouts of 6 open source designs using the NC7SZ157P6X.
What resistor goes on the NC7SZ157P6X Z pin?
The Z pin has a series resistor on 4 of 6 designs, most often 33 Ω. Counted from the KiCad layouts of 6 open source designs using the NC7SZ157P6X.
What parts are used alongside the NC7SZ157P6X?
The 25AA1024T-I/SM, ADAU1452WBCPZ, ADM811TARTZ-REEL, CS2100CP-CZZ and ESP32-WROOM-32U appear in the most repositories here.
Which microcontrollers do boards using the NC7SZ157P6X use?
Most are built on ESP32 (3) and AVR/Arduino (2).
How big is a typical board using the NC7SZ157P6X?
The median is 105 × 66.5 mm, and 83% are two-layer designs.
What is the most popular open source board using the NC7SZ157P6X?
By GitHub stars, FreeDSP-aurora by freeDSP, with 222 stars.
Can I simulate one of these boards using the NC7SZ157P6X before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.